Operating instructions

Ear Force X4 Operating Instructions. Version 1.0 Copyright 2008 Voyetra Turtle Beach, Inc. All Rights Reserved
Page 7
DIGITAL
OUT
IN
1. Connect the XBOX 360 Component
HD AV cable or S-Video AV Cable to
your Xbox as described in the Xbox
user guide.
2. Connect the TOSLINK digital optical
cable the
digital output on the Xbox cable (1) to
the digital input on the transmitter (2) .
(included with your X4) from
STEP 1: Connect the XBOX to the X4 Transmitter
Step 2: Connect the power adapter
1. Connect the DC power adapter to the
X4 power socket and plug the power
adapter into an AC outlet.
2. Press the power switch (3) and check
if the power LED indicator on the front
panel is on.
X4 transmitter
rear view
XBOX AV
Cable
X4 power adapter
TOSLINK
cable Included
with the X4
Caution: Use only the Power Adapter
included with your X4. Failure to use
the correct adapter can result in fire,
damage to the unit or other hazards.
Step 3: Insert the X4 headphone batteries
1. Remove the battery cover (4) in the right ear cup
by pushing in and down.
2. Insert the included AAA batteries with the
positive side facing down.
3. Replace the battery cover.
4. Press the headphones power button (5) and
check if the power LED is flashing. If not, check if
the batteries are inserted correctly.
Step 4: Insert the mic boom
1. Insert the mic boom into the jack (6) so that the
holes in the mic casing are facing your mouth.
2. Place the foam cover over the mic if desired.
+ AAA BATTERY -
+ AAA BATTERY -
X4
To remove the
battery cover,
push in and
push down.
Insert the
batteries
with the
positive
side down.
DC IN 9V
POWER
ON - - OFFBASS BOOST
POWER
Setting up the XBOX 360 and Ear Force X4
Insert the boom so that the
holes in the mic casing
and the marker on the jack
are facing your mouth
Remove and replace
the foam cover so
you can see the
mic position