Operating instructions

Ear Force X4 Operating Instructions. Version 1.0 Copyright 2008 Voyetra Turtle Beach, Inc. All Rights Reserved
Page 6
XBOX Controller Cable (”Puck”)
XBOX
CONTROLLER
CABLE
Puck:
Chat volume and Mic Mute:
To connect the Xbox Live chat
signals, insert the puck into the Xbox
controller and insert the small jack on
the other end of the cable into the
Xbox socket (2) on the headphones.
Use the
mic mute switch to turn off the mic
when you don’t want to be heard. Use
the volume control to adjust the chat
level in the headphones.
Insert the puck
into the
Xbox controller
Insert the
small jack into
the headphones
Xbox socket (2) as
described above
Turtle Beach
MUTE
MIC
ON
Transmitter Input Modes and Dolby Processing
Sound field with Dolby Headphone
surround sound processing
Stereo sound field
FL
SW
SL
FR
C
SR
R
L
The X4 uses Dolby Pro Logic II, Dolby Digital, and Dolby Headphone surround processing technologies the
industry-standard formats for encoding multi-channel game audio. Dolby Headphone processing recreates 5.1
surround sound using the X4 stereo headphones so you can hear the sound all around you, as if you were
listening to a 5.1 speaker system.
When the digital input signal is active, the front panel digital light turns on and the analog inputs are turned
off. So you don’t have to disconnect cables to switch between analog and digital sound sources.
If the Bypass LED is on, Dolby processing is defeated and the signal will be heard as stereo.
If the digital input is a Dolby Digital 5.1 channel signal, the front panel DD light turns on and Dolby
Headphone processes the to create surround sound on the headphones.
If the digital input is stereo, PL II s signal is
an expanded stereo
—
The X4 transmitter supports three types of digital source material and analog stereo. When the Bypass button is
ON, Dolby Processing is defeated, so you can hear the unprocessed input signal in stereo, as it sounds from
the source. Here’s how the signal processing modes operate:
5.1 channels
If the digital source is a Dolby Pro Logic II signal, both Dolby lights will turn on and Dolby Headphone creates
PL II surround sound on the headphones.
the DD light turn on and the processed by Dolby Headphone to
create sound on the headphones.
If the digital input is not active (or is disconnected) the analog stereo signal will be active.
If there is an analog stereo input and the Bypass LED is on, there will be no Dolby processing and the signal
will be heard as stereo.
If there is an analog stereo input and the Bypass LED is off, the front panel DD PL II light turns on and the
analog stereo signal is processed by Dolby Pro Logic II and Dolby Headphone to create an expanded stereo
sound on the headphones.
n
n
n
n
n
n
n
n