SAFETY PRECAUTIONS The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner manual.
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
TABLE OF CONTENTS Safety Precautions ..................................1 Important Safety Instruction ................. 2 Table Of Contents .................................... 3 Disc Formats ............................................ 4 Accessories ............................................... 5 Remote Control ........................................ 5 Control Reference Guide .................... 6-7 Power Supply ................................... 8-10 Repeat Playback ..............................
DISC FORMATS The unit can playback DVDs [8cm/12cm disc] D I G I TAL PHOTO Audio CDs [8cm/12cm disc] Region Management Information Region Management Information: This unit is designed and manufactured to respond to the Region Management Information that is encoded on DVD discs. If the Region number printed on the DVD disc does not correspond to the Region number of this unit, this unit cannot play that disc. The region number of this unit is 1.
ACCESSORIES Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts. • To order accessories contact 1-800-252-6123 or wed sits www.1800customersupport.com) (http:// Remote control (with battery) (043-R13232-011) .............................................................. x 1 AC adaptor (133-010902-003) ............................................................................................. x 1 AC power cord (134-A13211-20P) .......
CONTROL REFERENCE GUIDE Remote Control 1) ZOOM button Zoom into an image of a DVD. TV MODE button In stop mode, select whether to output the video signal. TV shows "AUTO" means output signal depends on DVD (either NTSC or PAL). TV shows "PAL" or "NTSC" which means output signal fixed to PAL or NTSC. 2) STOP button Stop playing a disc. PLAY button Press to start or resume playback a disc. PAUSE button Pause playback, frame advance.
CONTROL REFERENCE GUIDE Unit 16 17 18 19 20 1 2 15 3 4 5 6 7 14 13 12 11 10 1) 2) 3) 4) 5) 6) 7) 8) Cursor ( , , , ) button Use to highlight selections on a menu screen and make adjust certain settings. ENTER button Confirm selections on a menu screen. BRIGHTNESS button Adjust the relative lightness or darkness of the colour. DIGITAL OUT jack AV IN / DVD switch Turn off to AV IN mode. Turn into DVD mode. AV IN / OUT jacks Headphone jacks VOLUME control Adjust the volume.
POWER SUPPLY A. Using the AC adaptor This AC adaptor operates on AC between 100V and 240V, but • In the U.S.A. and Canada, the AC power supply cord must be connected to a 120V AC power supply only. • When connecting to an AC supply outside of the U.S.A. and Canada, use a plug adaptor to suit the AC outlet configuration.
POWER SUPPLY C. Using the rechargeable battery pack • Charge the rechargeable battery pack before using them for the first time. • The rechargeable battery pack is suitable when adapting the unit for portable use and when it is convenient for you to enjoy the unique functions of the unit out of doors. To recharge the battery Remove the rechargeable battery pack from the unit (if being used). RECHARGEABLE BATTERY PACK (7.
POWER SUPPLY Disconnecting the Battery Pack to the unit. Push the button to disconnect the RECHARGEABLE BATTERY PACK RECHARGEABLE BATTERY PACK bottom of the unit Condition and attention: • When RECHARGEABLE BATTERY PACK battery is low, player will stop playing. • During the playback, if the battery is low, the BATTERY LOW indicator on the unit front panel will turns into red and blink. At this time, please recharge the battery. • Do not short-circuit the terminals.
CONNECTING OTHER EQUIPMENT A. Connecting the Game Consoles / other Video Equipment • you can connect your Game Consoles or other Video Equipment to playback through the system. Right side of unit (Yellow) (Red) AUDIO/VIDEO CABLE (Yellow) To AV IN/OUT Jack (White) (Red) (White) AUDIO/VIDEO CABLE (included) Game Consoles / other Video Equipment 3.5mm plug description Watching a Video Equipment 1. Turn on the unit, slide the AV IN / DVD button to select "AV IN". 2.
CONNECTING OTHER EQUIPMENT C. Another source connection This unit can play Dolby Digital, but only in two channels. Analogue connection Right side of unit (No need to connect the Yellow video plug) Amplifier of stereo system, etc. (Red) (Yellow) AUDIO IN (White) (Red) (White) AUDIO/VIDEO CABLE AUDIO/VIDEO CABLE (included) Digital connection COAXIAL DIGITAL AUDIO CABLE Audio equipment with digital audio input jack DIGITAL OUT Rear side of unit Listening to another audio equipment 1.
CONNECTING OTHER EQUIPMENT Right side of unit Using Headphones/Earphones • Turn down the volume before connection, and then adjust the level. • When headphones/earphones are connected, no sound will be output from the unit's speakers. Caution: • Avoid listening to sound at levels which may be harmful to your ears. HEADPHONES / EARPHONES (3.5mm diameter plug) ADJUSTING THE SOUND Dolby Digital (for DVD) Dolby Digital is a sound system developed by Dolby Laboratories Inc.
DVD CD Basic playback PLAYING A DISC This owner’s manual explains the basic instructions of this unit. Some DVD discs are produced in a manner that allows specific or limited operation during playback. As such, the unit may not respond to all operating commands. This is not a defect in the unit. Refer to the instruction notes of discs. “ ” may appear on the screen during operation. A “ is not permitted by the unit or disc. ” means that the desired operation Playing a Disc 1.
PLAYING A DISC Fast Forward/Fast Reverse DVD CD 1. Press the SEARCH or SEARCH button of the remote unit when a disc is playing. • The disc begins fast scan at x2 speed. or • Four speeds are available. Each time SEARCH SEARCH button is pressed, the speed of fast scan changes in the following sequence: Note : You also can press and hold 2. Press the / (PREV/NEXT) buttons on unit repeatedly to select different fast scan speed.
PLAYING A DISC DVD Angle selection Some DVDs contain scenes which have been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles. 1. While you are playing a DVD with different angles recorded, press the ANGLE button to view the number of the current angle. 2. Press the ANGLE button repeatedly to change the scene to the next angle in those recorded. • About two seconds later, playback continues from the new angle you selected.
DVD SPECIAL FUNCTIONS Basic playback DISPLAY function Using DISPLAY, you can check and change the current settings of the following items: ANGLE, AUDIO and SUBTITLE. • While the disc is playing, press the DISPLAY button of the remote unit to display the screen shown below. Elapsed time: Elapsed time from the beginning of the chapter which is currently playing. Remaining time: Remaining time of the title which is currently playing.
SPECIAL FUNCTIONS Basic playback Locating a specific title DVD If a DVD disc contains title numbers, you can locate a specific title by directly selecting a title number. 1.Press the GOTO button. 2. Press , or button to highlight a specific field and press the corresponding number button(s) for the title you want. 3. Press the ENTER button to confirm. The unit will start playback about 3 seconds later.
SPECIAL FUNCTIONS Basic playback Locating a specific time DVD CD You can move to a specific location by entering its corresponding time (hours, minutes, seconds) 1. Press the GOTO button. 2. Press or button to highlight time. DVD CD 3. Press the corresponding number buttons for the setting point you want. • The first two numbers you entered represent hours. • The second two numbers you entered represent minutes. • The third two numbers you entered represent seconds. 4.
Advanced playback CD / DVD PROGRAMMABLE MEMORY Programmable memory The two types of programmed playback provided by this unit are title/chapter programmed playback and title programmed playback. Title / Chapter programmed playback DVD 1. Press the MEM (Memory) button while the disc is stopped. 2. Enter the title numbers in in -- -- . Use or . button to move the highlight to chapter and enter the chapter numbers Title Chapter 3. Use , , or button to move to the other field. 4.
Advanced playback REPEAT PLAYBACK You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, A-B repeat) Repeating a title DVD You can play the same title repeatedly. 1. While the disc is playing, press the REPEAT DISC button until the “ Repeat Title ” indicator displays on the screen. The current title is played repeatedly. Repeating a chapter You can play the same chapter repeatedly. 2.
Advanced playback REPEAT PLAYBACK Repeating a specific section DVD CD You can play a specific section repeatedly. 1. While the disc is playing, press the REPEAT A-B button at the beginning of the section ( Rep A- ) is displayed you want to play repeatedly. 2. Press the REPEAT A-B button again at the end of the section ( Rep A-B ) is displayed. 3. The Unit will immediately begin replaying your selection. To resume normal playback 4.
PLAYING PICTURE FILE DISC This unit can play Picture files recorded on CD-R and CD-RW discs. Playing a Picture file disc 1. Press the OPEN button to open the disc door. 2. Hold the Picture disc by its sides and carefully make it fit onto the central support of compartment with the label side facing up you until you hear a “click”. 3. Push the door to close. 4. The unit will take a short while to load the disc. PLAY button. The next picture will automatically display after 6 seconds. 5.
CUSTOMIZING THE FUNCTION SETTINGS LANGUAGE setting STEP 12 1. Press the SETUP button in stop mode. 2. Use or button to one language, then press the ENTER button. The screen will change to your selected language wordings immediately. 3. To exit the SETUP MENU and return to the normal screen, press the RETURN button. Language Video Audio Rating English Deutsch Français Español Italiano Svenska Português VIDEO setting TV Shape 1. Press the SETUP button in stop mode. 2.
CUSTOMIZING THE FUNCTION SETTINGS Brightness 1. Press the SETUP button in stop mode. 2. Use or button to select Video, then press the ENTER button. 3. Use or button to select Brightness, and then press the ENTER button. 4. Use or button to shift and select the Off/On, then press the ENTER button. 5. If you want to exit the SETUP MENU and return to the normal screen, press the RETURN button. On : Picture will be brighter to clarify details. Off : Picture will have deepened colors. Edges 1.
CUSTOMIZING THE FUNCTION SETTINGS Virtual Effect (for CD and DVD only) If you want to obtain expansive virtual surround sound effects from just two speakers. 1. Press the SETUP button in stop mode. 2. Press or button to select Audio, press the ENTER button. 3. Press or button to select Virtual Effect, then press the ENTER button. 4. Press or button to select ON or OFF, then press the ENTER button. 5.
LANGUAGE CODE LIST FOR DISC LANGUAGE Code Language Name Code Language Name Code Language Name Code Language Name AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DA DE DZ EL EN EO ES ET EU FA FI FJ FO FR Afar Abkhazian Afrikaans Ameharic Arabic Assamese Aymara Azerbaijani Bashkir Byerlorussian Bulgarian Bihari Bislama Bengali Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French FY GA GB GL G
MAINTENANCE Cleaning Disc A defective or soiled disc inserted into the unit can cause sound to drop out during playback. Handle the disc by holding its inner and outer edges. • Do NOT touch the surface of the unlabeled side of the disc. • Do NOT stick paper or tape on the surface. • Do NOT expose the disc to direct sunlight or excessive heat. • Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth. • NEVER use solvents such as benzine or alcohol to clean the disc.
TROUBLE SHOOTING GUIDE SYMPTOM CAUSE (AND REMEDY) No power. • Check that the AC adaptor and AC power cord is connected. • You cannot turn on the unit. The remote does not function. • Remove any obstacles between the remote and the unit. • Use the remote near the unit. • Point the remote at the remote sensor on the unit. • Replace all the batteries in the remote with new ones. DVD No sound or only a very low-level sound is heard. • Make sure that you've select DVD mode.
CARRYING BAG INSTALLATION 1. Insert the unit into bag as shown. 4. Take another strap and hook up the upper headrest of the driver's seat as shown. 2. Insert the straps on carrying bag as shown. 5. Take loop elastic band to around the headrest of the driver's seat and unit as shown. 3. Take straps and hook up the neck headrest of the driver's seat as shown. 6. Adjust the straps tightly so that the unit is secured.
GAME PAD (CONNECTIONS) Connecting the Video game system Right side of unit (Red) (Red) (White) (White) (Yellow) (Yellow) TO AV IN/ OUT Jack White (Audio L ) Red (Audio R ) Yellow (Video) Ground DVD 3.5mm plug description AUDIO/VIDEO CABLE (included) Playing a Video game system 1. Turn on the unit, slide the FUNCTION button to select "AV IN". 2. Turn on the video game system and follow the instructions provided with it to play game.
