Inc. Program Optimizer Manual

68 Dolby
®
DP600 Program Optimizer Manual
DP600 Program Optimizer Detailed Profile Descriptions
6. Profilesthatarecapableofprocessingsourcefilesintomultipleoutputfiles(for
example,a5.1+2–channelDolbyEdecode)nameeachprogramasfollows:
Program1:
source_filename-sequence[1]-program[1]-corrected.wav
Program2:source_filename-sequence[1]-program[2]-corrected.wav
7. AllprofilesreferencingMPEG‐2transportstreamsassumethatonlyasingleprogram
ispresent.
8. For
.wavfileslarger than4GB,theDP600supportsonlytheEuropeanBroadcasting
Union(EBU)RF64BWF‐compatiblemultichannelfileformat.(AnRF64formatfile
mayalsobetermedasaMultichannelBroadcastWAVFormat,orMBWF,file).
9. All20‐bitDolbyEdatamustbeformattedperSMPTE337Mandwrapped
ina24‐bit
.wavfilecontainerbeforetransferringittotheDP600forprocessing(thisexcludesany
DolbyEdatacontained withinanMPEGtransportstream,MPEGprogramstream,or
GXFfile).
10. All16‐bitDolbyEdatamustbeformattedperSMPTE337Mandwrappedina16‐bit
.wavfilecontainerbeforetransferringittotheDP600forprocessing(thisexcludesany
DolbyEdatacontained withinanMPEGtransportstream,MPEGprogramstream,or
GXFfile).
Note: The -correctedsuffixappearsifaloudnesscorrectionstepwasperformed.
Note: 16‐bitDolbyEdataissupportedonlywhenusedwithspecificprofiles.Formore
information,seetheprofiledescriptionsinSection B.2.