Inc. Program Optimizer Manual

Creating a Work Order
Dolby
®
DP600 Program Optimizer Manual 33
3. Clickthe
Sourcefield.
The
Enter Path screenappears,asshowninFigure 2‐37.Inthisscreen,youcanenter
thepathtothefileorfolder(forahotfolder)thatyouwanttodesignateforprocessing.
Beforeenteringapath,besureyou’ reconnectedtoanactivenetwork,andthensetup
asharedfolder
forallauthorizedusers,asdescribedinSettingUpaSharedFolderon
page 57.
Youcanenterapathusinganyofthefollowingmethods:
• EnteraURL(directly)
TypethedesiredURLinthe
URLfield.Youmustpre‐encodeyourURLentry,
whichcannotincludetheusername/password/domaininformationinthe
URL
field.Forexample,smb://dp600/users/common/hot_folder/.Ifnecessary,youcan
entera
Username,Password,and Domain (SMB only)inthecorrespondingfields
below.AfterenteringtheURL,click
ok.
• Browsetothedesiredlocation
Click
browsetodisplaytheSelect Protocolscreen(iftheURLfieldisblank)and
selecteither
Windows Share/SMBorFTP or SFTP,thenclicktherightarrowand(if
necessary)entera
Username,Password,andDomain (SMBonly)intheEnterUser
Credentials
screen.ClicktherightarrowandenterapathintheEnter Server
Details
screen.ThenclickfinishtodisplaytheSelect Filescreen,clickonthe
desiredfileorfolder,thenclick
ok.Ifyouwanttocreateabookmark,clickonthe
desiredfileorfolderinthe
Select Filescreen,clickadd,thenclickok.Ifyouclick
browse andthe URLfieldisnotblank,thesystemattemptstobrowsetothe
enteredURL.
• Selectabookmark
Clickonthe
Bookmarksfieldtodisplayallthebookmarksyoupreviouslyadded
inthe
Select Filescreen(asdescribedpreviously),thenselectthedesired
bookmarktospecifythepath,andclick
ok.Whenyouselectabookmark,it
automaticallyappearsinthe
URLfield.Ifnecessary,youmuststillentera
Username,Password,andDomain (SMBonly),inthecorrespondingfi eldseach
timeyouselectthebookmark.Afterselectingthebookmark,youcanclick
browse
togotothecorrespondinglocation.
Figure2‐37 
Figure 2-37 Enter Path Screen
Note: SupportedfilesystemprotocolsincludeFTP,SAMBA/CIFS,and
SFTP.
Note: Forcompletedetailsonenteringapathusingtheabovethree
methods,seeEnteringaPathonpage 58.