Inc. Program Optimizer Manual

Starting the System for the First Time
Dolby
®
DP600 Program Optimizer Manual 23
Reconfiguring the Network Settings
Toreconfigurethenetwork settings:
1. Press
config inthesystem screen.
The
configscreenappears,asshowninFigure 2‐24.
Figure2‐24 
Figure 2-24 Config Screen
2. Pressnetwork intheconfig screen.
The
networkscreenappears,whereyoucanreconfigureyournetworksettings,as
showninFigure 2‐25.Thisscreenissimilartothe
networkscreeninFigure 2‐4,except
forthe
undobuttonatthelowerleftcorner.Theundobuttoninthisscreenreplacesthe
cancelbutton.Ifyoupresstheundobutton,thesystemdeletesyournewentriesinthis
screenonly.Afterchangingyournetworksettings,youarepromptedtomanually
rebootthesystem.
Figure2‐25 
Figure 2-25 Network Screen
Caution: Beforechangingthenetworksettings,besureyou’ reconnectedtoanetwork.
undo
button