- Dolby Multichannel Audio Tool User's Manual

62 Dolby
®
DP570 Multichannel Audio Tool User’s Manual
Configuring a Monitor System
A.1.4 Choosing Back Surround Speakers
Thesettingrecordsthenumberofbacksurroundspeakersyouhaveinyourmonitoring
system.ThedefaultisNone.Ifthisnotcorrect,clickeither1or2.
A.1.5 Emulator Reversion
Thissettingisnotactiveinthecurrentversion.
A.1.6 Setting the Lt/Rt Gain
ThisisaninputtrimfortheseparateLt/Rt Input.Thedefaultvalueis0dB.Adjustitusing
thecontrolshowninFigure A‐4.
FigureA‐4 
Figure A-4 Lt/Rt Gain Function
A.1.7 Configuring Dolby Pro Logic II
Foradiscussionofthesefeaturesandtheiruses,seeSection4.21.
TosetuptheDP570forDolby
®
ProLogic
®
II:
1. SelectamodebypressingoneofthebuttonsshowninFigure A‐5.Thedefaultis
Movie.
2. InMusicmode,usetheslidersshowninFigure A‐5toadjusttheCenterWidth
value
andDimensionvalues.Thedefaultforbothis0.
FigureA‐5 
Figure A-5 Pro Logic II Controls
Note: Movieistherecommendedmodeforprofessionalmonitoring.Thewiderangeof
possiblechoicesinMusicmodemakeittoocomplexandunpredictabletoemulate.