- Dolby Multichannel Audio Tool User's Manual

Sticky Settings
Dolby
®
DP570 Multichannel Audio Tool User’s Manual 37
UnityGainmodeisenabledbydefault.ToturnUnityGainmodeoff:
1. ClickSetupintheMainwindowtoopentheSetupwindow.
2. UnchecktheUnityGainModeboxontheleftsidenearthebottom.
Figure 4‐8showsadetailoftheUnityGainModeboxontheSetup
window.
Figure4‐11 
Figure 4-8 Unity Gain Mode Box
4.17 Sticky Settings
WhenyouenableStickySettings,yourlastsettingsfordynamicrangecontrolprofiles,
downmix,speakerselection,LFEmonitor,mastervolume,andemulatorbypassforyour
listeningenvironmentremainwitheachprogramwhenyouleaveoneprogramtomonitor
another.Thisallowsyoutoswitchtoanotherprogram,monitorthatprogram,
thenreturn
totheoriginalprogramwithoutlosingthesettingsyouhad chosenfortheoriginal
program.
WhenyoudisableStickySettings,settingsforthesemonitoringmodesdonotchange
whenyouleaveoneprogramtomonitoranother.
Bydefault,StickySettingsisenabled.Toturnitoff,uncheckthebox.
4.18 Lt/Rt Gain Function
ThiscontrolallowsyoutocontrolgainoftheLt/Rtinput.
TotrimtheLt/RtinputlevelintheDolbyRemote570:
1. ClickSetupintheMainwindowtoopentheSetupwindow.
2. UsetheupanddownarrowstoincreaseordecreasethedefaultLt/Rtgain.
Figure 4‐9showstheLt/RtGaincontrol
ontheSetupwindow.
Figure4‐12 
Figure 4-9 Lt/Rt Gain Control
4.19 Dim Function
TheDimbuttonenablesyoutochangeyourmonitorlevelwithoneclick.Clickit,for
instance,ifaclientwalksinoryouhavetotakeaphonecall.Returntoyourmasterlevel
settingbyclickingDimagain.