Technical data

CONNECTION

Your LCD TV offers you the possibility of connecting a PC or a video source with a DVI out-

put (a DVD player for example) to it. Your LCD TV is able to reproduce both analog and digi-

tal input signals. Connect the DVI-I socket of the LCD TV to the video adapter of your PC or

to your video source. Connect the line output of your PC or the audio output of your video

source to the PC audio input (black jack socket next to the DVI-I input on the back of the

device), in order to reproduce the audio signals on the LCD TV. You may possibly have to

use corresponding adapters or adapter cables for the connections.

Note: Please pay attention to the Instructions for Use of your PC and the sound card and

the video adapter or your video source and the technical data of your LCD TV, in order to

select the necessary settings for the resolution and the vertical scanning frequency at the

PC.

SETTINGS IN THE PC MODE

Press the PC Button to switch to the PC Mode. All pictures and sound in the PC Mode func-

tion precisely as in TV Mode.

Press the MENU Button to reach the Main Menu, select the PICTURE Menu Point and press

the MENU Button again. Move the Selection Bar to the PC SETTINGS Point with the P+/P-

Buttons and press the MENU Button again. You will reach the Menu for the PC SETTINGS:

1. Mode:

This Point shows whether there is a signal at the DVI-I input socket of the LCD-TV. It is

not possible to reach the settings for the picture presentation as long as NO SIGNAL is

displayed (displayed in grey).

2. Change name:

It is possible to give a name to the PC setting. Press the MENU Button to reach the En-

try Mode (cursor appears). Now, you will be able to select the symbols with the P+/P-

Buttons and change the position with the den VOL+/VOL- Buttons. Leave the Entry

Mode by means of the MENU or the EXIT Button.

PC settings

1. Mode

2. Change name

3. Input

4. Horizontal position

5. Width

6. Vertical position

7. Phase

8. Frequency