Model No. Número de modelo TC-L32E3 TC-L37E3 TC-L42E30 Owner’s Manual 32”/37”/42” Class 1080p LCD HDTV (31.5/37.0/42.0 inches measured diagonally) Manual de usuario Televisión de alta definición de 1080p y clase 32”/37”/42” de LCD (31,5/37,0/42,0 pulgadas medidas diagonalmente) For assistance (U.S.A./Puerto Rico), please call: 1-877-95-VIERA (958-4372) www.panasonic.com/help For assistance (Canada), please call: 1-866-330-0014 www.vieraconcierge.ca Para solicitar ayuda (EE.UU.
Experience an amazing level of multimedia excitement Enjoy rich multimedia SD memory card USB device Camcorder VCR Personal computer Cable box Amplifier with Speaker system DVD recorder/ Blu-ray Disc recorder 2 DVD player/ Blu-ray Disc player
VIERA Link™ is a trademark of Panasonic Corporation. HDMI, the HDMI logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Contents Please read before using the unit SDXC Logo is a trademark of SD3C, LLC. DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance. Manufactured under license from Dolby Laboratories.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.
19) An outside antenna system should not be located in the vicinity of overhead power lines, other electric light, power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 20) Unplug this LCD TV from the wall outlet and refer servicing to qualified service personnel under the following conditions: a.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Accessories/Optional Accessory Accessories Check you have all the items shown. Accessories Remote Control Transmitter Batteries for the Remote Control Transmitter (2) N2QAYB000570 Pedestal TBL5ZX0093(TC-L32E3) TBL5ZX0161(TC-L37E3) TBL5ZX0037(TC-L42E30) AA Battery Child safety Quick Start Guide Product Registration Card (U.S.A.) Optional Accessory Wall-hanging bracket TY-WK3L2RW Please contact your nearest Panasonic dealer to purchase the recommended wall-hanging bracket.
Attaching the pedestal to TV ■Assembling the pedestal Fix securely with assembly screws A (Total 4 screws). Tighten screws firmly. A Accessories Bracket Assembly screws (4 of each) A Front XSS5+16FJK size(M5 x 16) (for 32”) XSS5+15FNK size(M5 x 15) (for 37”, 42”) B Base (image: TBL5ZX0093) XYN4+F30FJK size (M4 × 30) ■Set-up Fix securely with assembly screws Tighten screws firmly. Bracket (1) (Total 4 screws).
Connections Connection Panels LAN connector Front of the TV USB 1 connector USB 2 connector ST4 A SD card slot (p. 22) AV IN HDMI 4 C PC terminal DIGITAL AUDIO OUT B Antenna or Cable connection VHF/UHF Antenna Back of the TV Power Cord (Connect after all the other connections have been made.
AV cable connection Best To use HDMI terminals AV Equipment HDMI AV OUT e.g. Blu-ray Disc player HDMI-DVI Conversion cable DVI OUT AV Equipment AUDIO OUT e.g. Blu-ray Disc player L R ● VIERA Link connection, please refer to p. 29 ● The HDMI connection is required for a 1080p signal. To use COMPONENT terminals Y green green green PB COMPONENT blue Good blue blue VIDEO OUT AV Equipment PR red red red e.g.
Identifying Controls TV controls/indicators Front of the TV Selects channels in sequence Volume up/down Menu navigations Power indicator (on: red, off: no light) POWER button C.A.T.S (Contrast Automatic Tracking System) Remote control Closed Caption On/Off (p. 17) Switches TV On or Off (Standby) Selects Secondary Audio Programming (p. 17) Select source to watch (p.
First Time Setup The first time setup screen is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” (p. 48) is set to “No”.
ANT/Cable setup Do you use a Cable, Satellite or Fiber Optic box with this TV? ANT/Cable setup Step 4 of 7 Do you use a Cable, Satellite or Fiber Optic box with this TV? Yes No OK Select Return Yes a Select signal type (Cable/Antenna) ANT/Cable setup Step 4 of 7 ANT/Cable setup Step 4 of 7 How does the TV receive its programming content? Cable service (No box) Which wiring method is used to connect your box to the TV? Over-the-Air Antenna select AV IN Antenna/Cable in HDMI Antenna Cable
Label the inputs for easy identification (Label inputs) To name each input, follow the instructions on screen. When done, select NEXT and press OK to go to the next step. Label inputs select Step 5 of 7 What is connected to HDMI 1 ? For your convenience, you may name each input for easy identification. The labels will be shown in the “Input select” menu. set HDMI 1 Video GAME GAME Next or OK Select HDMI 2 RETURN HDMI 3 1 @.
Adjust the Clock (Set clock) When done, select NEXT and press OK to go to the next step.
■ About wireless LAN ● Wireless LAN adapter and Access point need to be obtained separately. For the latest information on applicable LAN adapters, check the following website: http://Panasonic.com/NetConnect ● Check that the Access point supports WPS*. (If it does not support WPS, the encryption key of the Access point is required when configuring settings.) ● Follow the instructions on the Access point setup screen and configure the appropriate security settings.
Watching TV Turn power on (Remote) Note Please select correct input --> (TV) (p. 21) or Select a channel number or When tuning to a digital channel, press the button to enter the minor number in a compound channel number. down • Also available side CH button on the unit. [For Cable/Satellite box connection] - Use your connected box’s remote control.
Change aspect ratio and Zoom the picture ■ Press FORMAT to cycle through the aspect modes (p. 50) • 480i, 480p: FULL/JUST/4:3/ZOOM • 1080p, 1080i, 720p: FULL/H-FILL/JUST/4:3/ZOOM Use when the picture does not fill the whole screen (bars appears on either side of the image) or portions of the picture is trimmed. Note 1. Some content, such as film-based movies, are available in extra-wide format. Top and bottom bars are unavailable. 2.
■ Other Useful operations Entering characters You can use the remote control keys to enter the alphanumeric characters. ■ Switches input mode Menu Proxy setting Proxy address 1 4 8 ABC → abc → 123 Proxy port 0 ■ Press each number key to cycle through the alphanumeric character OK Select RETURN ABC → abc 1 @. 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7PQRS 8 TUV 9WXYZ LAST 0 - , Delete Navigation area ● You can also use a USB keyboard (not supplied) to enter the alphanumeric characters. ● Keyboard type (p.
Using VIERA TOOLS VIERA TOOLS is the easy way to access the TV’s special features. They are displayed as shortcut icons on the TV screen. Display VIERA TOOLS Select the item ● The icons displayed differ depending on your country or area you select. (p. 12) select next (example) EASY IPTV Set each item Using EASY IPTV p. 39 Part of Icons on VIERA TOOLS screen above provide you usable Internet service such as VOD (Video-on-demand), Music distributer or social networking service etc.
Watching content from external devices With the connected equipment turned On Display the Input select menu Select the input mode Input select 1 ANT/Cable In Not used 2 HDMI 1 GAME 3 HDMI 2 4 HDMI 3 5 HDMI 4 6 Component 7 Video 8 PC or GAME AUX select enter (example) (shortcut) press the corresponding NUMBER button on the remote control to select the input of your choice. Or, press the INPUT button repeatedly, to cycle through the available inputs.
Using Media Player You can view still and motion images and play music saved on a USB flash memory and an SD card.
Viewing Contents Insert a Media (SD card or USB flash memory) • Auto play setting Image viewer auto play (p. 48) Display Media player or (example) Select Drive (Display connected drive) Media Player select Drive select OK OK Select RETURN SD memory card Select the Media Basic Media Player select Media select OK OK Select RETURN Photos Videos Music SD memory card Select the data (Photos/Videos/Music) How to view the data differs depending on data storage conditions.
Photos view [Photos thumbnail] Media Player [Features] Photos Select SUB MENU Slideshow OK RETURN Sort All photos ● Slideshow setting ● Sort ● Drive select ● Media select SD memory card Info Drive select Media select [Photos playback screen] Photo status Slideshow Single view ● To display/hide Single view Guide and Banner Navigation Guide Slideshow Single view Rotate Prev. Rotate Prev. Stop Next RETURN Stop Prev.
Slideshow Display “Slideshow settings” Adjust items and select “Slideshow start” Media Player settings Photo Slideshow All photos Start Slideshow Frame Off Photo effect Off Transition effect Photo size Off Off Display interval Normal Repeat playback On RETURN Select OK RETURN Sort Off Photo effect Off SD memory card Info Drive select Media select (example) OK Off Photo size Select SUB MENU Slideshow Frame Transition effect Soundtrack settings Change select Start Slideshow N
Videos view [Videos thumbnail] Media Player [Features] Videos ● Play ● Drive select ● Media select ● Aspect change Titles/Folders view Trip1 Trip2 Trip3 Trip4 Trip5 Room Nature1 Nature2 Nature3 Nature4 Nature5 Nature6 2009_4 2009_7 2009_9 Select SUB MENU Play OK SD memory card Info RETURN Drive select Media select [Videos playback screen] SD 01/04/2010 15:34 Movie banner 00:00.10 00:00.03 Drive type (SD/USB/DLNA) SD 01/04/2010 15:34 00:00.10 00:00.
Music view [Music thumbnail] Media Player My Music_1 [Features] Music My Music_2 Select SUB MENU Play Folder ● Play folder ● Drive select ● Media select Folders My Music_3 OK SD memory card Info RETURN Drive select Media select [Music playback screen] Navigation area AAAAAA BBBBBBB XXXXXXX Forward Play/Pause Stop Reverse RETURN 00:00.05 / 00:00.
VIERA LinkTM “HDAVI ControlTM” Simultaneously control all Panasonic “HDAVI Control” equipped components using one button on the TV remote. Enjoy additional HDMI Inter-Operability with compatible Panasonic products. This TV supports “HDAVI Control 5” function. Connections to equipment (DVD recorder DIGA, HD Camcorder, Home theater system, Amplifier, etc.) with HDMI cables enables VIERA Link controls. Equipment with the “HDAVI Control” function enables the following operations: Version Operations (See p.
VIERA Link™ Connections (with VIERA Link function) ■ Terminal overview Back of the TV AV IN HDMI 4 VIERA LinkTM “HDAVI ControlTM” ■ Connecting DVD Recorder (DIGA) HDMI cable DVD recorder (DIGA) with VIERA Link function ■ Connecting Home theater system/AV amp HDMI 1 is recommended. HDMI cable AV amp with VIERA Link function DVD recorder (DIGA) with VIERA Link function No optical cable is necessary when connecting a Home Theater supporting “HDAVI control 5” with an HDMI cable.
VIERA Link settings and Available features To use all VIERA Link functions: After everything is connected, in VIERA Link settings menu, set “VIERA Link” to “On”. Some features are disabled depending on the “HDAVI Control” version of the equipment. Please check the list (p.
Automatic Input Switching When using a Blu-ray Disc player, DVD player/recorder or Home theater system, the TV will automatically change to the appropriate input, when playback begins on one of those devices. • For a Home theater system the speakers automatically switch to the theater system. Power on link Yes: The TV is turned on automatically and switches to the appropriate HDMI input whenever VIERA Link compatible equipment is initially turned on and the Play mode is selected.
VIERA Link menu and Available features Some features are disabled depending on the “HDAVI Control” version of the equipment. Please check the list (p. 28) Display the VIERA Link menu or This function is not available depending on your country or area you select. (p.
Speaker control You can select the Home theater or TV speakers for audio output. Control the theater speakers with the TV remote control. This function is available only when a Panasonic Amplifier or Player theater is connected. select change Recorder Volume up / down Mute Select “Speaker output” Select “Home theater” or “TV” VIERA Link control ■ Home theater: Adjustment for the equipment Speaker output sound of the TV is muted. • The the equipment is turned off, the TV speakers • When take over.
Using Network services Available Network service and features ■ Using EASY IPTV p. 39 ■ Using DLNA feature (Home network) p. 40 This TV is a DLNA Certified™ product. DLNA (Digital Living Network Alliance) is a standard that makes DLNA Certified digital electronics easier and more convenient to use on a home network. To learn more, visit www.dlna.org. It allows you to share photos, videos and music stored in the DMS (for example, PC with windows 7 installed, etc.
Network Connections Contact your Broadband service provider NOTICE: If you don’t have Internet service by your local provider, please order a high-speed Internet service at no less than the following connection speed. If you already have such service, make sure that the connection speed exceeds the following. ● Required speed (effective): at least 1.5 Mbps for SD and 6 Mbps for HD picture quality, respectively. ● Dial-up Internet service cannot be used for EASY IPTV.
Network settings This is a setting for connecting to a broadband environment.
Wireless network (Wireless network setting) ■ Sets / Changes wireless network setting Press “Wireless network” and display setting screen Follow the directions on screen to complete the setting Wireless network select Please choose connection method: OK Search for wireless networks WPS (Wi-Fi Protected Setup using push button) WPS (Wi-Fi Protected Setup using PIN number) Manual settings * Wi-Fi Protected Setup is an easy setting of the Wi-Fi Alliance’s certification ● For more details on setting of an
Network cameras list Before using a Network camera, you need to register the camera as shown below. You can also set Default camera or Disconnect/Delete the registered cameras. Press “Network cameras list” and display screen Start camera search. ● Before you start to search for a camera, switch the camera to registration mode. Set Network camera setting select Network cameras list Camera name Model Status Camera 1 BL-C210A Connected ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
Using EASY IPTV This function allows you to access Internet services, such as VOD (Video-on-demand), music distribution or social networking service etc, easily with selecting the VIERA TOOLS icon. ● You need broadband environment to use this service. Preparations ● Network connections (p. 35) ● Network settings (p.
Using DLNA feature You can share the contents (Photo, Video, Music etc.) stored in DLNA Certified media server with your home network system. Preparations ● Network connections (p. 35) ● Network settings (p. 36-38) Display VIERA TOOLS Select the “DLNA” select next (example) Select server Display available server.
Network Camera You can operate the Network camera from the TV remote and also check the images from the Network camera on your TV. ● VIERA Link control only with the TV’s remote control (p. 33) Preparations ● Network connections (p. 35) ● Network settings (p.
Editing and Setting Channels The current channel settings can be changed according to your needs and reception conditions.
Manual program (Set manually) Use this procedure when changing the channel setup or changing the channel display. Also, use this to add or skip channels from the channel list manually. You can select a channel tuning mode (Digital only/Analog only) in “Channel surf mode”(p. 48) Edit ● Caption Edit CH caption Channel Select Apply Favorite Add ... Yes 3 ... ... Yes 4 ... ... Yes 5 ... ... select next Caption Select or edit the station identifier.
How to Use Menu Functions Various menus allow you to make settings for the picture, sound, and other functions so that you can enjoy watching TV best suited for you. Display the menu Shows the functions that can be adjusted. Some functions will be disabled depending on the type of input signal. Menu structure Menu Menu bar Press OK to move to the Menu items. Input labels HDMI 1 Menu items Press OK to proceed to next screen if available.
● “Reset to default” will be grayed out if no changes are made in the following menus: “Picture”, “PC adjustments”, “Audio” and “Closed caption”. Picture settings Adjust the image or picture quality Settings Items Reset to defaults Picture mode Vivid Standard Cinema Game Custom (Photo) Item Description Resets all picture adjustments to factory default settings except for “Advanced picture”. Provides enhanced picture contrast and sharpness for viewing in a well-lit room.
Settings HDMI settings Items Item Description HDMI/DVI RGB Auto/ range (HDMI 1-4) Standard (16-235)/ Nonstandard Contents type (HDMI 1-4) Off/Auto/Photo/ Graphics Prevents the blown out highlights and blocked up shadows when a wide-range signal is received. Selects between standard RGB range (16-235 bits) or non-compliance (0-255 bits). Auto: Switches the RGB range (Standard (16-235)/Nonstandard) depending on the HDMI signal information. Sets content type to each HDMI input.
Lock Locks specified channels or shows to prevent children from watching objectionable content. You will be asked to enter your password each time you display the Lock menu. • Password setting/entering (p. 19) Set “Custom” in “Mode” to specify “Channel”, “Game”, “Program” and “EASY IPTV” settings. Settings Mode (EASY IPTV)* Item Description Unlocks all the Lock settings of “Channel”, “Game”, “Program” and “EASY IPTV”.
Setup Settings Channel surf mode Language Clock ANT/Cable setup Input labels (Display labels of connected devices) Other function settings Items All/Favorite/ Digital only/ Analog only English/ Español/ Français Item Description Sets the mode to select the channel with the Channel up/down button. Favorite: Only channels registered as FAVORITE. (p. 18) Selects the screen menu language. Adjusts the clock. (p. 15) See p. 42-43 for more detail. Selects the terminal and label of the external equipment.
Ratings List for parental control “V-chip” technology enables you to lock channels or shows according to standard ratings set by the entertainment industry. U.S. MOVIE RATINGS (MPAA) NR G PG PG-13 R NC-17 X NO RATING (NOT RATED) AND NA (NOT APPLICABLE) PROGRAMS. Movie which has not been rated or where rating does not apply. GENERAL AUDIENCES. All ages admitted. PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children. PARENTS STRONGLY CAUTIONED.
Technical Information Aspect Ratio (FORMAT) Press the FORMAT button to cycle through the aspect modes. This lets you choose the aspect depending on the format of the received signal and your preference. (p. 18) (e.g.: in case of 4:3 image) FULL JUST JUST FULL Enlarges the 4:3 image horizontally to the screen’s side edges. Stretches to justify the 4:3 image to the four corners of the (Recommended for anamorphic picture) screen.
Data format information ● Compatible Data format for Media player (SD card/USB flash memory)/DLNA p. 26 DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association’s standard EXIF: Exchangeable Image File Format Note ● Format the card with the recording equipment. ● The picture may not appear correctly on this TV depending on the recording equipment used. ● Display may take some time when there are many files and folders.
VIERA LinkTM “HDAVI ControlTM” HDMI connections to some Panasonic equipment allow you to interface automatically. (p. 29) ● This function may not work normally depending on the equipment condition. ● The equipment can be operated by other remote controls with this function on even if the TV is in Standby mode. ● Image or sound may not be available for the first few seconds when playback starts. ● Image or sound may not be available for the first few seconds when input mode is switched.
PC Input Terminals ● Signal Names for D-sub 15P Connector Pin No. 11 12 13 14 15 6 7 1 9 10 8 2 3 4 5 Pin Layout for PC Input Terminal Signal Name R G B NC (not connected) GND (Ground) Pin No. Signal Name GND (Ground) GND (Ground) GND (Ground) NC (not connected) GND (Ground) Pin No.
Care and Cleaning First, unplug the Power cord plug from the wall outlet. Display panel The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lintfree cloth. If the surface is particularly dirty, soak a soft, lint-free cloth in diluted mild liquid dish soap (1 part mild liquid dish soap diluted by 100 times the amount of water) and then wring the cloth to remove excess liquid.
Specifications TC-L32E3 TC-L37E3 TC-L42E30 AC 110-127 V, 60 Hz Power Source Display panel 68 W 81 W 104 W Standby condition 0.2 W 0.2 W 0.2 W Aspect Ratio 16:9 32” class 37” class (37.0 inches measured (31.5 inches measured diagonally) diagonally) 27.5 ” × 15.4 ” × 31.5 ” 32.2 ” × 18.1 ” × 37.0 ” (698 mm × 392 mm × 800 mm) (819 mm × 460 mm × 940 mm) 2,073,600 (1,920 (W) × 1,080(H)) [5,760 × 1,080 dots] Visible screen size (W × H × Diagonal) (No.
Frequently Asked Questions (FAQ) If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, visit the Panasonic web site for further assistance. (see cover) Questions Picture 56 Answers How do I view the picture from devices such as a: Cable/ Satellite box, game console, Blu-ray or DVD player? Press the INPUT button on the remote to select the correct input source.
Questions Answers Sound Check that the correct SAP (Secondary Audio Program) is selected by pressing the SAP button on the remote control. Check that all connections of external equipment connected to the TV are secure. When using Cable or Satellite box, check the device’s audio settings.
Questions How do I get EASY IPTV to work on my TV? Answers 1. You need a broadband (high speed) Internet service with a speed of no less than 1.5 Mbps (p. 35). 2. Connect the TV to the Internet through your router by an Ethernet cable or a compatible Panasonic USB wireless adapter. 3. Run the “Connections Test”, under the Network Settings menu.
Index A S Safety ....................................................................... 4 SAP ........................................................................ 17 Scan ................................................................. 13, 42 SD Card ........................................................... 22, 51 Signal Meter ........................................................... 43 Sleep ...................................................................... 46 Specifications ...............
Limited Warranty (for U.S.A.
Customer Services Directory (for U.S.A. and Puerto Rico) Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/help or, contact us via the web at: http://www.panasonic.
Limited Warranty (for Canada) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT – LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price.
Note Limited Warranty (for Canada) Support Information 63 tc_L32_37e3_42e30_eng_0589-1.
Customer’s Record The model number and serial number of this product can be found on its back cover. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes. Model Number Serial Number Anotación del cliente El modelo y el número de serie de este producto se encuentran en su panel posterior.
TC-L42E30 42" LCD HDTV SPECIFICATIONS Dimensions (W x H x D) 39.5" (1,002 mm) x 25.5" (646 mm) x 11.4" (288 mm) (Including TV stand) 39.5" (1,002 mm) x 24.1" (611 mm) x 1.7" (41 mm) (TV Set only) Mass 40.5 lb. (19.0 kg) (Including TV stand) 33.0 lb. (15.0 kg) (TV Set only) Power Source AC 110-127 V, 60 Hz Rated Power Consumption 104 W On mode Average Power Consumption 54 W Standby condition 0.2 W DIMENSIONS JACKS Top View Side Panel ST4 Front View Side View 3 (75) 1.7 (41) 39.5 (1002) 25.
TC-L37E3 37" LCD HDTV SPECIFICATIONS Dimensions (W x H x D) 35.1" (890 mm) x 23.0" (582 mm) x 10.3" (260 mm) (Including TV stand) 35.1" (890 mm) x 21.6" (548 mm) x 1.7" (41 mm) (TV Set only) Mass 32.0 lb. (14.5 kg) (Including TV stand) 26.0 lb. (12.0 kg) (TV Set only) Power Source AC 110-127 V, 60 Hz Rated Power Consumption 81 W On mode Average Power Consumption 39 W Standby condition 0.2 W DIMENSIONS JACKS Top View Side Panel ST4 Front View Side View 3 (75) 1.7 (41) 35.1 (890) 21.
TC-L32E3 32" LCD HDTV SPECIFICATIONS Dimensions (W x H x D) 30.3" (769 mm) x 20.3" (514 mm) x 9.1" (230 mm) (Including TV stand) 30.3" (769 mm) x 18.9" (480 mm) x 1.7" (41 mm) (TV Set only) Mass 26.0 lb. (12.0 kg) (Including TV stand) 20.5 lb. (9.5 kg) (TV Set only) Power Source AC 110-127 V, 60 Hz Rated Power Consumption 68 W On mode Average Power Consumption 38 W Standby condition 0.2 W DIMENSIONS JACKS Top View Side Panel ST4 Front View Side View 3 (75) 30.3 (769) 18.9 (480) 20.3 (514) 1.