User`s manual

User’s Manual
28
2. Press EXIT key to save and exit.
9.3 Factory Default
Warning: This function will restore system
settings to factory defaults and erase all channels.
Select Main Menu → Settings → Advance Settings →
Factory Default and press OK key, a warning box pops
up for confirmation. Select “OK” and press OK key to
confirm or select “EXIT” and press OK key to cancel
the operation. System will reboot after restoring.
9.4 Modify System Password
System password is required to view the locked rec-
orded file or enter some menus, such as Advance
Settings, etc. The default password is “1234”. You can
change it if necessary.
Select Main Menu → Settings → Advance Settings →
Modify System Password and press OK key to enter.
1. Press number keys to input new password.
2. Input new password again for confirmation.
3. Press EXIT key to save and exit.
Note: Don’t forget the password, if forgotten you will need to contact your local dealer.
9.5 Parental Control
You can set parental level for programs and modify parental control password.
1. Modify PG Password
PG password is required to view programs beyond the
set parental level. You can modify it if necessary.
Select Main Menu → Parental Control → Modify PG
Password and press OK key to enter.
1. Press number keys to input new password.
2. Input new password again for confirmation.
3. Press EXIT key to save and exit.
Note: Don’t forget the password. If the password is
lost you will need to contact your local dealer.
2. User Parental Level
Select Main Menu → Parental Control → Modify PG
Password and press OK key to enter.
1. Highlight “User Parental Level” and press 
keys to select a parental control level.
2. After setting, press EXIT key to save and exit.
Note: Parental control password is required to
view programs beyond the set level.