User`s manual

User’s Manual
1
Safety Instruction
Read following items carefully before operating your new VAST receiver.
Installation
 This receiver should be installed horizontally. Unbalanced installation may cause damage.
 Install the receiver in a place with:
Good ventilation (leave space not less than 10cm around this receiver)
No heat source (radiator, heater, fireplace, amplifier, etc)
Low humidity (especially not bathroom, kitchen, etc)
No direct sunlight
Low vibration
Maintenance
 Unplug this receiver from power socket before changing connections between this unit and
other related equipments.
 Don’t unplug or insert signal, audio and video cables when this receiver is on.
 To avoid the risk of lightning strike, unplug power adapter of the receiver from power socket
in lightning storm.
 Unplug power adapter from power socket when the unit is not going to be used for a long
time or is damaged.
 When moving this receiver from hot to cold or vice versa, turn the unit off for 1 hour before
to prevent moisture build up.
 To avoid the risk of fire or electric shock, don’t expose this receiver to rain, water and don’t
put object with liquid on this unit.
 Do not cover vents of this receiver with paper, table cloth, curtains, etc.
 Don’t put heavy objects on this receiver.
 Unplug power adapter of this receiver from power socket before cleaning. To reduce
damage, clean this unit with dry cloth. Do not let liquid spill or spray liquid into this device to
avoid serious damage.
Power Socket and Power Adapter
 Make sure the power pack is not covered as this pack will get warm.
 Do not insert or pull out power adapter with wet hands to avoid electric shock.
 Do not use damaged power adapter. If power adapter is damaged, contact your local
dealer for replacement to avoid risk of fire or electric shock.
RCU Battery
 Batteries should be installed in accordance with the polarity markings (+/-) on battery
compartment.
 Remove batteries if RCU is not used for a long period of time.
 Replace batteries if there is not enough power and dispose of battery waste with the envi-
ronment in mind.
Accessory
 Only use accessories specified by the manufacturer, as other unsupported accessories
may cause damage to the receiver.