User`s manual

User’s Manual

4. Connect TV Using RF Cable (For use with older TV’s or Commercial use)

There are 2 ways to connect TV using RF cable.

1. Connect LNB IN port on the receiver to satellite dish with an RF cable.

2. Connect RF OUT port on the receiver to corresponding port on TV.

3. Tune your TV to channel 38 (default) you can do this by either entering manual tuning on

your TV or selecting to auto tune function on your TV. If your TV is Digital you will need to

select ATV (analogue) to view the VAST decoder via this method.

 Analog Signal Input from RF IN Port

1. Connect RF IN port on the receiver to your terrestrial TV signal source with an RF cable.

2. Connect RF OUT port on the receiver to corresponding port on TV.