Specifications

6-11
Analog Optical Alignment - Projector
EXIT
Press
EXIT
.
FORMATS
Menu Cancel OK
Exit
Press
Manual EQ
(SK2) and repeat the
high frequency adjustment for the left
channel.
P1, Left
OK
Select
Projector 1, Left channel
by
rotating the front panel knob and
pressing
OK.
Again, rotate the
main fader
for the
most extended high frequency response
without "peaking".
The frequency response (both channels)
must be within 1dB to at least 12kHz.
EXIT
Press
EXIT
.
The final step is to adjust the output
level of the optical preamplifier for
Projector 1.
Thread and run the Cat. No. 69T Dolby
Tone test film.