Specifications

5-9
B-Chain Alignment
The system now displays a dialog box
allowing you to select the channel to
equalize.
OK
Rotate the front panel knob until the
desired channel is displayed, then press
the
OK
key to select the channel.
SK1
SK1
The display will switch to the
27 Band
Half-Screen
mode. This screen is split
into two parts which display equalizer
band settings, or “sliders” at the top, and
a frequency versus level analyzer at the
bottom.
NOTE
:
For enhanced resolution, the Real-
Time Analyzer has a second display mode,
called "Full-Screen". To change to full screen
display mode, press the
Full Scrn
key (SK1).
This larger display allows closer scrutiny of the
analyzer's results. Only one graphic equalizer
control is displayed at a time. Once again,
rotating the front panel knob will select the
band to adjust, and holding the "Up/Down
arrow" key (SK4) while rotating the front panel
knob will adjust the selected band's EQ.
To return to the "Half Screen" mode of display,
press the “Split Scrn” key (SK1).
SK3
Set the coarse equalization by pressing
Treb / Bass
(SK3).
The screen will change to the
Bulk EQ
screen. The lower half will continue to
show the frequency versus level analyzer
and the top will switch to Bass and
Treble controls. (The "full-screen"
display mode is available here also.)