Specifications

5-8
B-Chain Alignment
Each of the channels should now be
adjusted to give a reasonable sound
pressure level in the room. It is not
necessary to get exact readings at this
point since the levels will change slightly
during equalization of the room. Exact
output level adjustment must be
performed after equalization.
To select the channel to be adjusted,
rotate the front panel knob. Pink noise is
routed to the channel indicated by the
video highlight along the bottom of the
screen.
FORMATS
Menu Cancel OK
Exit
Adjust the output level of the selected
channel by pressing and holding the
Up/Down Arrow
key (SK4) and
rotating the front panel knob.
EXIT
OK
When all the channel output levels are
adjusted, press the
EXIT
key. The
system will display a box prompting you
to save or discard the changes.
Press
OK
to save the settings.
FORMATS
Menu Cancel OK
Exit
To perform equalization of the room,
Press
B-Chain Alignment
(SK1).
FORMATS
Menu Cancel OK
Exit
Then, press
B-Chain Equalization
(SK1).