User`s manual

B-Chain Alignment Procedures
Notes
5-35
Play a music cassette or CD on the non-sync device. If possible, select a
recording that has a natural ambience such as an orchestral work.
Press the format 60 non sync switch.
Check that the local FADER is selected—the local active LED on the CP45 is lit.
If necessary, select the local FADER by pressing the fader select switch.
Set the FADER to the 7 setting.
Play a cassette or CD on the non-sync device and adjust the non-sync L (left) and
non-sync R (right) controls on the Cat. No. 511 card for the desired level in the
theater.
5.6 Non-sync Level Adjustment