User`s manual

2-8
J8 Non-sync 1 mode
NORMAL Selects standard non-sync processing. The non-
sync signals are sent to the left, center and right
screen channels, with a mono mix to the surround
channel. There is no center or subwoofer output.
The CP45 is factory set to this position.
MATRIX Selects full 2:4 matrix decoding of the non-sync
signal. The output is sent to the left, center, right,
surround and subwoofer channels without noise
reduction. This format would be used for
playback of video sources.
J7 Mono (format 01) mode
MONO ENHANCE Generates a pseudo-stereo output
which tends to enhance mono sources.
May be used when large amounts of
mono material will be played.
MONO NORMAL Selects normal mono operation on
Format 01. The CP45 is factory set to
this position.
2.4.4 Cat. No. 510 Switches
HFHF
TRIMTRIM
LEVELLEVEL
HFHF
TRIMTRIM
LEVELLEVEL
HFHF
TRIMTRIM
OUTPUTSOUTPUTS
LEVELLEVEL
LEVELLEVEL
MICMIC
FREQFREQ
LEVELLEVEL
RIGHTRIGHT
LEVELLEVEL
LEFTLEFT
HIGHHIGH HIGHHIGH
FREQFREQ
PROJECTOR 2PROJECTOR 2
FREQFREQ
HIGHHIGH
RIGHTRIGHT
CENTERCENTER
LEFTLEFT
RIGHTRIGHTGNDGND LEFTLEFT
FREQFREQ
HIGHHIGH
LEVELLEVEL
LEFTLEFT
Cat. No. 510Cat. No. 510
RIGHTRIGHT
LEVELLEVEL
PROJECTOR 1PROJECTOR 1
ACAC
INPUTINPUT
POWERPOWER
MODEMODE
DCDC
CROSSOVERCROSSOVER
ONON
OFFOFF
RIGHTRIGHT
OUTOUT
AA
LEFTLEFT
800 HZ800 HZ
CENTERCENTER
BB
SELECTSELECT
PROJPROJ
ININ
LLRRCC
LOSSLOSS
CCRRLL
500 HZ500 HZ
CROSSOVERCROSSOVER
FREQFREQ
SCREENSCREEN
Crossover On/Off Switches
ON Enables the crossover circuitry for use with bi-amplified
speaker systems connected to the Left, Center, and
Right screen channels.