User`s manual

2-5
2.4.2 Output Signal Test /Hearing Impaired Signal Select Switches
NS1NS1
TEST MIXTEST MIX
MIXMIX
ININ
OUTOUT
BYPASSBYPASS
MOD
E
MOD
E
CINEMA
P
CINEMA
P
SWSWCCRRLLRR
SSSS
OUTOUT
LL
TESTTEST
JJ
IMPAIREDIMPAIRED
HEARINGHEARING
ININ
NS2NS2
A
These switches select which CP45 output signal(s) are sent to
connector J4 terminals 3 and 4.
With HEARING IMPAIRED/TEST switch set to HEARING
IMPAIRED:
L, C, R, and S are combined for use with a hearing impaired
system. The individual channel switches are not active.
HEARING IMPAIRED/TEST switch set to TEST:
This function is used for testing purposes. As each test mix
switch is set to IN, the corresponding channel is added to the
output terminals.
L Left
C Center
R Right
Ls Left Surround
Rs Right Surround
SW Subwoofer
BYPASS MIX Switches
These switches provide a path for non-sync signals to reach the
CP45 output when the unit is in bypass mode.
Bypass mix switch set to OUT:
Casette tape music (for example) will not be heard when
the unit is switched to bypass. This is the factory
setting.
Bypass mix switch set to IN:
Non-sync sources will be mixed with projector sound
inputs when the unit is switched to bypass.