Specifications

located in C:\OEMXML. It is also assumed that the OEM application profile blob file is
created in C:\OEMXML, and named as atiapoem.blb.
1. In the command line, execute:
>atiapfxx –oem –s c:\oemxml\oemappprofiles.xml –b c:\oemxml\atiapoem.blb –l
c:\oemxml\atiapoem.blb –l c:\oemxml\log.txt
2.
Review the log file, C:\oemxml\log.txt.
Pay special attention to lines that start with ERROR:. They indicate problems
with the input XML. The following examples show common errors with
instructions of how to fix them.
• ERROR, Area <…> referred by the profile is missing in the
system blob.
The area
identifier is misspelled in the use declaration. An example is
shown in the following figure.
Figure 2–3 Misspelled Area Identifier
Replace PXDynam with PXDynamic to fix the error.
• ERROR, Application <…> use doesn't refer to an existing area <…
> profile <…>.
The GPU identifier is misspelled. An example is shown in the following
figure.
10 Functional Description
Muxless Switchable Graphics Technology PX5.0 Functional Specification
137-41940-10
© 2011 Advanced Micro Devices, Inc.
Proprietary and Confidential - Do not duplicate.