Technical information

18 Helpful Hints

 If you experience problems connecting your camcorder, make sure the camcorder is

attached properly.

 Make sure the FireWire adapter card is seated properly in the computer.

 To prevent damage to your camcorder, make sure the camcorder is powered off

when connecting or disconnecting it from the computer.

 Do not switch the camcorder's mode (Camcorder or VTR/VCR) while running

neoDVDplus. Exit the application and then switch the mode. Keep the camcorder in

the Off state for a few seconds when switching, then restart neoDVDplus.

 Do not click on the VTR controls in rapid succession. This could possibly damage

the tape. Some of the controls, such as Fast Forward and Rewind, require some

time to start and stop the tape. The transport response delay varies between

camcorder models and depends on your operating system.

 Try defragmenting your Hard Disk Drive before recording long video clips. Rebooting

your machine may also improve performance.