Technical information

___ Check IEEE-1394 card type (must be OHCI compliant).

___ Verify that your analog capture card is supported by neoDVDplus.

___ Verify that you have the latest updates for your PC's Operating Systems.

___ Check graphics cards type and memory (AGP, 8MB).

___ Check available disk space on the disk where neoDVDplus is installed (5GB

minimum).

___ Verify that your audio card is properly installed and running.

___ Check color depth (True Color 24-bit or higher).

___ Check to see that the camcorder has adequate battery or AC power.

___ Check to see that the FireWire cable is firmly attached to the camcorder and

computer end. Do not bend or kink the FireWire cable; a damaged cable will need

replacement.

___ Close unnecessary applications before running neoDVDplus. This will allow

neoDVDplus to utilize all the system resources on your computer.

___ If you are using MPEG-2 Compliance, verify the following:

General: Program stream

Video: Frame picture

Bottom field first

29.97 frames per second (NTSC) or 25 frames per second (PAL)

Max bit rate: 7.0Mbps

Average bit rate: 5Mbps

Audio: PCM Audio

16-bit

Sampling rate: 48KHz

Stereo: 2 channels