Technical information

2. Double-click on the Power Management entry.

3. In the Power Schemes tab, go to the System Standby entry and select Never

from the drop-down box.

− For Window ME and Windows 2000:

1. Click on Start > Settings > Control Panel.

2. Double-click on the Power Options entry.

3. In the Power Schemes tab, go to the System Standby entry and select Never

from the drop-down box.

− For Windows XP:

1. Click on Start > Control Panel > Performance & Maintenance.

2. Double-click on the Power Options entry.

3. In the Power Schemes tab, go to the System Standby entry and select Never

from the drop-down box.

Laptop users should run them with the AC adapter for better performance. Running

your laptop on battery power reduces the overall performance.

15 Recommended Computer Upgrade

If you plan to upgrade your computer, you can optimize the neoDVDplus performance by

paying special attention to the following component specification considerations:

 Hard Disk Drive. Select a Hard Disk Drive with the shortest seek time and the

fastest data transfer rate. For example, ATA100 or UDMA100 and higher.

 Processor. Select AMD Athlon, or Intel's Celeron,Pentium III or Pentium 4, with the

fastest CPU clock speed (700MHz or higher) that is compatible with your

motherboard requirements. For optimal and real-time performance, a 1.1GHz or

higher system is required.

 4X AGP Card with YUV 4:2:2 Rendering. Select a graphics card that supports

hardware YUV 4:2:2 rendering.