Technical information

1. Add your desired video clips into the neoDVDplus application.

2. Double-click on the thumbnail of the video clip, or select the thumbnail of the video

clip you want to work on, then click on the Edit button. This video clip opens in the

Edit mode.

3. From the Settings Panel on the right-hand side of the neoDVDplus interface, click on

the Select button under the Audio Overlay option. The Audio File window opens.

4. Select your desired audio tracks from the templates provided with neoDVDplus.

You also have the option to add or remove audio tracks by clicking on the Add or

Remove button. neoDVDplus supports WAV and MP3 audio file formats. To hear a

sample of the audio track, select the track from the drop-down list and click on the Play

button.

NOTE: neoDVDplus adds the audio track to the beginning of the video clip by default. If

you want to insert your audio in the middle or end of the video clip, create an audio file

without any sound until it gets to the section where you want the audio inserted. For

example, if you have a 10-minute clip, but you do not want the audio to begin until the

fifth minute, create an audio file whose first four minutes are blank.

10.4.6 Record Narrative for Overlay

To use a microphone connected to your PC to record voice commentary as an overlay

on your DVD or VCD clip:

1. From the Settings Panel on the right-hand side of the neoDVDplus interface, click on

the Select button under the Voice Narration option. A dialog window opens.

2. Select your desired audio settings.

3. Click on the Record button to begin your recording session.