Technical information

and Mark-Out buttons to mark the section of the clip you want to export onto your
disc. You can also use the Video Slider Bar to get to your desired section by
scrolling through the video clip instead of playing the entire footage.
10.4.3 Multiple Chapter Insertion
If you have a long video clip and you want to insert several chapter points (for example, if
you want to create five different chapters in a one-hour clip), perform the following tasks:
1. Add the desired video clips into the neoDVDplus application.
2. Double-click on the thumbnail of the video clip, or select the thumbnail of the video
clip from which you want to create multiple chapters and click on the Edit button.
The video clip opens in the Edit mode.
3. If working with a video file input, click on the Play button. The video begins to play in
the Preview window. Click on the Chapter button to insert a new chapter at
each desired section of the clip. To remove the chapter point insertions you have
made in neoDVDplus, click on the Chapter button.
NOTE: As you add each chapter point, marked areas are automatically indicated on
the Video Slider Bar.
4. If working with live video input, set the timer to specify the total time (how much
footage) you want to capture onto a disc, unless you want to capture the entire
contents of the tape.
5. Indicate how frequently you want to insert chapter points in the clip by entering a
number in the Every box, located in the Settings panel under the Set Chapter
Interval option. Chapter points are automatically inserted at the minute-intervals that
you specified.
26