Technical information

10. If you want the disc to go back to the main DVD or VCD menu after playing back
each chapter, click on the Back to Menu radio button.
11. Indicate how much of the TV signal you want to record. neoDVDplus allows you to
preset how much of the clip you want to record by entering the time in the Total
Time box.
10.2.4 Video Quality Settings
This option allows you to select the video quality of your DVD or VCD project.
neoDVDplus supports three video quality settings: Good (lowest quality), Better (medium
quality), Best (high quality). The video quality settings allow you to trade off video quality
with the amount of data you can save on your disc. The lowest quality setting allows you
to save the largest amount of data to a disc as the highest video compression is used.
NOTE: The audio portion of a DVD project also takes up a large amount of space on the
final disc. So if you want to store more DVD-video on your DVD or CD media, we
recommend that you select a lower video quality setting in conjunction with an audio
output stream that will take up less space on your disc. neoDVDplus currently allows you
to output the audio portion of your DVD project into two formats: Dolby
®
Digital (which
takes up less data space on your disc) and LPCM (which is an uncompressed audio
format, and therefore takes more data space on your disc). To select your desired audio
output stream, simply click on the options button.
You can currently record approximately10 - 15 minutes of DVD video onto a CD. If you
choose the Good (lowest quality, highest compression) setting in conjunction with
selecting Dolby
®
Digital audio format, you can record approximately 50 minutes of a DVD
video onto a CD. The Good setting produces a small file size of lower quality video (i.e.,
VCR tape quality).
22