Technical information

3. Click on the Video Connector button and select the TV Tuner option from the drop

down list.

4. Click on the TV Setting button and select your desired TV channel from the

Channel Index.

5. Click OK. If you do not have any channels listed in the index::

 Select the Viewing Region You Reside In. This ensures your channel listing

corresponds to the region you reside in.

 Select the Appropriate TV Signal. This can either be an Antenna signal or a

Cable TV signal.

 Click on the Auto Tune Button. This allows your TV Tuner Card to search for all

available channels in your area. After the Auto Tune function is finished, all the

available TV channels are listed in the Channel Index. You can also rename the

channel listing by double-clicking on the Channel Name field.

6. Click on the Video Format button to open the Video Format dialog window. Click on

the NTSC or PAL radio button and click OK.

7. Click on the Audio Connector button and choose your desired audio input from the

available listing drop-down box.

8. You can create multiple chapters from the TV signal. Indicate how frequently you

want the chapters created by entering a specific time interval (i.e., every 30

seconds) in the Every option box located in the Settings panel on the right side of

the interface, under the Chapter Interval option. Chapter points are automatically

inserted at the specified minute-intervals.

9. You can also indicate if you want the disc to automatically playback each chapter,

one after the other, by clicking on the Next Clip radio button located in the Settings

panel on the right-hand side of the interface, under the End of Clip option.