Technical information

1. Click on the New File button located above the Preview window. A standard

Windows Explorer window opens to allow you to browse for video files stored on

your PC.

2. Select your desired video file and click on the Open button, or you can double-click

on the video name to add it to your file.

neoDVDplus supports the following video file formats: DVD-Video files (.ifo and .vob

format), DVD+VR disc file, AVI, QuickTime, and MPEG video files. Refer to the Helpful

Hints section to learn about MPEG compliance.

10.2.2 Adding Video Clips From a Videotape or Live Camera Source

You can add video content directly from a capture device into the CREATE module of

neoDVDplus. This means that if, for example, you have some content stored on a tape

that you want to include as a chapter in your DVD or VCD project, you can import the

tape contents directly into neoDVDplus.

To add video clips from a videotape or live camera source:

1. Click on the New Capture button.

2. Select the Live Video Capture thumbnail in the Preview window and click on the

Edit button, or double-click on the Live Capture thumbnail.

3. The Edit mode Preview window opens and displays the navigational buttons to

control your DV camcorder.

Using the Fast Forward and Rewind controls, position the videotape to the desired

section of the tape you want to transfer onto your disc.

NOTE: If you have an analog camcorder or VCR, you will not be able to control it

using the neoDVDplus navigational controls. You will need to use the controls on

your analog camcorder or VCR to position the videotape to your desired location.