Technical information

5. Select your video capture options. If you are capturing your content from video tape,

you can capture the complete contents of the tape or just a section of the tape.

To capture a section of your video tape, enter the desired capture time in the TOTAL

TIME field. Position your tape to the correct start location using the camcorder

controls on the neoDVDplus user interface (if you have a DV capture device), or by

using the controls on your analog capture device.

6. Select the video format in which you want to save your live capture. With

neoDVDplus, you can save your live capture content in the following video formats:

AVI, MPEG-1, or MPEG-2. Saving your video content in these formats allows you to

perform video editing before creating your DVD or VCD.

7. Select the video viewing format of your content. neoDVDplus allows you to output

your captured content in either the PAL or NTSC video format. A listing of all

countries and their corresponding video formats are provided. Click on the down

arrow next to the Viewable In option to scroll through the list and locate the

appropriate country.

NOTE: neoDVDplus allows you to create a PAL DVD or VCD from an NTSC source

file, and vice versa (i.e., direct PAL/NTSC conversion).

8. Click on the Capture Button to create your file. The progress of your capture

session is shown via the progress indicator.

NOTE: If you have an analog capture device, you cannot control it using the neoDVDplus

navigational controls. This means that if, for example, you want to capture your LIVE

content as a file, you need to hit the PLAY button on your analog capture device, then

click on the Capture button on the neoDVDplus user interface.