Technical information

b. Click on the TV Setting button. Select your desired TV channel from the

Channel Index, and click OK. You can also change any channel name by

clicking in the index table and typing a new name. If you do not have any

channels listed in the index, you should perform the following tasks:

 Select the Country You Reside In. This ensures your channel listing

corresponds to the region you reside in.

 Select the Appropriate TV Signal. This can either be an Antenna signal or a

Cable TV signal.

 Click on the Auto Tune Button. This allows your TV Tuner Card to search

for all available channels in your area. Once the Auto Tune function is

completed, all of the available TV channels are listed in the Channel Index.

You can also rename the channel listing by double-clicking on the Channel

Name field.

3. Select your Audio Source. neoDVDplus displays all the available audio sources for

your content in the AUDIO SOURCE drop-down box. If you have more than one

audio source connected to your PC, click on the Audio Selector button and select

the desired audio input for your content. To increase or decrease the volume of your

selected audio input, click on the Input Gain button and select your desired volume

from the Input Gain window.

4. Select the file format in which you want to save your content. neoDVDplus allows

you to save your captured content in three formats: AVI, MPEG-1, and MPEG-2.

Once the files are saved in these formats, you can perform video editing or store

them on your PC's Hard Disk Drive for other uses.

NOTE: If you want to create a DVD, it is recommended that you save your video clip

as an AVI or MPEG-2 file. If you want to create a VCD from your video footage, it is

recommended that you save it as an MPEG-1 file.