Technical information

9.1 Creating a Video File Using the CAPTURE Module

You can create a video file to store and use later using the neoDVDplus CAPTURE

module:

1. Select your Video Source. Select the appropriate source from where the video you

want to capture is stored. You can use neoDVDplus with the following devices:

Analog/Digital Camcorders, VCRs, and TV Tuner cards.

If you started your camcorder in the Camera mode, you see live video in the

neoDVDplus Preview window. If you started the camcorder in the VTR/VCR mode,

you need to play the video tape in order to see it in the Preview window. If you have

connected a DV camcorder, the camcorder controls (i.e., Rewind, Fast Forward,

Play, and Stop buttons) on the neoDVDplus interface are activated.

NOTE: If you have an analog capture device, the control buttons on the

neoDVDplus user interface are not activated. If you need to navigate through your

video content, use the control buttons on your analog capture device.

Once your capture device has been switched on, it automatically appears in the

Video Source drop-down box. If you have multiple capture devices connected to

your PC, they are listed in the Video Source window. Select the appropriate source.

2. Select your Input. If you have an analog capture device (such as an analog

camcorder or a VCR) connected to your PC, neoDVDplus gives you the option of

adding your video into the application using a Composite connection (with standard

RCA cables) or with an S-Video cable. Click on the Video Connector button, then

select the desired input device from the drop-down list.

If you are using a TV Tuner Card as your capture device, be sure to perform the

following tasks:

a. Click on the Video Selector button and select the TV Tuner option from the

drop-down list.