Technical information

10
To connect your analog capture device:
1. Connect the analog capture card connector to one of the external data ports on your
computer.
2. Connect your analog capture device to the capture card using either Composite or
S-Video cables.
Composite cable connector pins are usually yellow, red, and white. The yellow pin
represents video, while the red and white pins represent audio.
If your capture card supports it, you can also connect your analog device using an
S-Video cable. This cable is used in conjunction with the Red and White audio
connectors. Most people use S-Video cables instead of the Yellow video connector
because they produce better video quality.
3. Turn on your analog capture device.
4. Launch the neoDVDplus application.
7.3 Setting up Your Camcorder in the Proper Mode
Most camcorders have two basic modes of operation. The first is known as the Camera
mode. This setting allows the user to record a live session to tape. The other mode is the
Composite (RCA) connector S-Video connector