Technical information
9
To connect your DV capture device, analog camcorder, or VCR deck to your computer:
1. Connect the IEEE-1394 DV cable connector to one of the external IEEE-1394 data
ports on your computer.
2. Connect the other end of the IEEE-1394 cable to the DV IN/OUT or the DV OUT
connector of your DV camcorder/VCR. Make sure the DV capture device is switched
off while connecting the IEEE-1394 cable.
3. Turn on your capture device.
4. Launch the neoDVDplus application.
7.2 Connecting Your Analog Capture Device
For analog capture devices (VHS camcorders or VCRs), you need to install an analog
video capture card. neoDVDplus currently supports the following analog capture cards:
ATI All-In-Wonder 128 Pro
ATI Rage Fury Pro
ATI All-In-Wonder Radeon
AverMedia AverTV Studio
AverMedia EZ Capture
COMpro Personal Cinema
Hauppauge WinTV 401
Conexant Fusion 878A
Dazzle DV Bridge
While these cards have been fully tested and verified to be compatible with neoDVDplus,
other analog capture cards may work with the software. Please check the Support
section of our Website at http://www.mediostream.com/support for updates on new
information regarding analog capture card support.