Technical information

8
3. Double-click on the Add/Remove Programs icon.
4. Click on neoDVDplus, and then click Add/Remove.
5. Follow the instructions on the screen.
NOTE: This process only removes the neoDVDplus application files. It does not delete
any imported media files, project files, or DVD builds in the neoDVD folder. To delete
these files, you will have to use Windows Explorer.
7 Before Starting neoDVDplus
After installing neoDVDplus, you need to connect your video capture device. You can
connect any Digital Video (DV) or analog capture device (camcorder or VCR deck) with a
video capture card. To connect a capture device:
1. Make sure your capture device and your computer are switched off.
2. Properly connect your digital video or analog capture device to the computer with a
FireWire or analog capture card cable.
3. Start your computer, and wait for Windows to finish initializing.
4. Turn on your digital video or analog capture device. WAIT A FEW SECONDS as the
computer detects the capture device and loads the appropriate software to
communicate with it.
5. The following sections describe how to connect the different capture devices.
7.1 Connecting Your DV Capture Device
If you have a DV capture device, you need to install an OHCI-compliant IEEE-1394 card.