Specifications

60 Dolby
®
DP600 Program Optimizer Manual
System Maintenance
5. Tightenthethumbscrewbyturningitclockwise,andreconnectpower,asshownin
Figure 3‐17.
ThereplacementunitLEDturnsgreenandthefront‐panelredLEDturnsoff,verifying
thatthenewunitisfunctioningcorrectly.
Figure3‐17 
Figure 3-17 New Power Supply Installed and AC Cable Reconnected
3.3 Upgrading/Installing the DP600 Software
TheDP600packingkitincludesaDP600InstallationSoftwareDVD.Withthisdisc,youcan
performacleaninstallationoranupgradeoftheDP600software(ifrequired).Aclean
installationrestorestheDP600tothefactorysettings,deletingallyournetworksettings,
customprofiles,workordersandreports,bookmarks,
anduserlogininformation.An
upgraderetainsallyourfilesandsettings.
ToperformanupgradeoracleaninstallationoftheDP600software:
1. Besuretheprovidedkeyboardisconnectedtooneoftheunit’sUSBports.
2. InserttheDP600InstallationSoftwareDVDintheCD/DVDdrive,andrebootthe
system.
A
messagesaysthatthesoftwareisalreadyinstalledanddisplaysthecurrently
installedversionandtheversionontheDVD.Itpromptsyoutoeithertype
yto
upgrade(refresh)orpressanykeytostartacleaninstallation.
3. Press
y toupgrade(refresh)orpressanyotherkeytostartacleanins tal lation.
Theupgradeorcleaninstallationprocessbegins.Whenthenewsof twareiscompletely
installed,youarepromptedtopressanykeytoreboot,andtoremovetheDVD.
4. Pressanykeytorebootandremovetheinstallationdiscfrom
theCD/DVDdrive.If
thediscisstillintheCD/DVDdri vewhilerebooting,acleaninstallationbegins.
Tighten thumbscrew and reconnect power