Specifications

38 Dolby
®
DP600 Program Optimizer Manual
Using the DP600
Followingisadescriptionoftheother
Additional Settings:
•
Stable Period
Allowsyoutofine‐tunethehotfolder/workorderactivationprocessforyour
specificnetworkenvironment.Thisappliestoconfigurationswherethesystem
copiesfilesfromoneserverintoahotfoldertheDP600ismonitoringonanother
server.Thisistypicalinwork‐flowenvironmentsthatprocessanextremelylarge

numberoffiles.Inthistypeofworkflow,someremotefilesy stemscannot
confirmtoanydegreeofaccuracywhenafileiscompletelycopiedfromitssource
intoahotfolder.
Byutilizingthe
Stable Periodparameter,theDP600periodicallychecksthesizeof
allnewfilesinthehotfolder,andwaitsuntilthefilesizestabilizes(doesnot
increaseinsize).Ifthefilesizeremainsthesameforthenumberofsecondsyou
enterinthe
Stable Periodfield,thenthe DP600activatestheworkorderprocesson
therespectivefiles.Thedefaultis
20seconds.Thisisasafeguardtoensurethe
systemdoesn’tbeginprocessingfilesbeforethey’recompletelycopiedintothe
designatedhotfolder.
•
Scan Interval
SpecifieshowoftentheDP600scansahotfolderfornewfilestoprocess.The
defaultis
5seconds.
•
Retry Count
Specifieshowmanytimesthesystemtriestoprocessahotfolderworkorder
beforetheworkorderfails.Thedefaultis
3.
•
Retry Delay
Specifieshowmanysecondsthesystemwaitsbeforeretryingtoprocessahot
folderworkorder.Thedefaultis
5seconds.
•
Include File Extensions
SpecifieswhethertoaddfilestothehotfolderthatincludeAll extensions(the
default)oronlythosefilesthatcontaintheextensionsyouenterinthisfield.
•
Enable Quarantine
Enablesthequarantineoptions.ClickthisboxtodisplaytheMax. Loudness
Correction Range (dB)+/-
field,whereyoucanenteravaluethatspecif iesthe
acceptablecorrectionrange.Iftheamountofloudnesscorrectionwouldexceed
thisrange,selectfromthefollowingtwooptions:
Correct file and copy to workorder destinationcopiesthecorrectedfiletothework
orderdestinationdirectory.Correctedfilesappearas
Quarantine Finished inthe
statusareainworkorderreportandlogscreens.
Do not correct file and copy to quarantine folderdisplaystheQuarantine Destination
field.Ifyouclickinthisfield,the
Enter Pathscreenappearswhereyoucanentera
directorywherethesystemcopiesanuncorrectedfile.Thisscreenisidenticalto
the
Enter Pathscreendescribedearlierforthesourcepath.Uncorrectedfiles
appearas
Quarantine Failed inthestatusareainworkorderreportandlog
screens.
•
Notes
Allowsyoutoenteranyrelatedtextforthecorrespondingworkorder.
Note: IfyouenableDelete Source FileintheAdd Workorder screen(seeFigure 2‐34and
Figure 2‐35),the
Additional Settingsdestinationoptionsallowyoutomove
(insteadofcopy)thecorrectedoruncorrectedfilestothespecifiedworkorder
directoryorthequarantinedirectory.