Specifications

36 Dolby
®
DP600 Program Optimizer Manual
Using the DP600
•Selectabookmark
Clickonthe
Bookmarksfieldtodisplaythebookmarksyouaddedinthe Select
File
screen(aspreviouslydescribed),thenselectthedesiredbookmarktospecify
thepathandclick
ok.Whenyouselectabookmark,itautoma ticallyappearsin
the
URLfield.Ifnecessary,youmust stillenteraUsername,Password,andDomain
(SMBonly)inthe correspondingfieldseachtimeyouselectthebookmark.After
selectingthebookmark,youcanclick
browsetogotothecorrespondinglocation.
6. Useoneofthepreviouslydescribed methodstoenterthepathtothefileorfolder(for
ahotfolder)thatyouwanttodesignateforprocessing,thenclick
ok.
Clickthe
Primary Dest.field.
The
Enter Pathscreenappears.Inthisscreen,youcanenterthepathtothefolderwhere
youwanttosavetheprocessedfiles.Thisscreenisidenticaltothe
Enter Path screen
describedearlierforthesourcepath.
Optionally,youcanenterapathtoasecondlocationtosavetheprocessedfiles.Todo
this,clickthe
Secondary Dest.fieldtodisplaythe Enter Pathscreen.Thisscreenis
identicaltothe
Enter Path screendescribedearlierforthesourcepath.
7. Clickthe
Delete Source Fileboxifyounolongerneedthefileafterthesystem
processestheworkorder.Thissettingalsoworksinconjunctionwiththe
Enable
Quarantine
feature,asdescribedonpage38.
8. Clickthe
Overwrite Destination Fileboxifyouwanttosaveanotherfilewiththesame
namewhenthesystemprocessestheworkorder.
9. ForaGrassValleyHotFolderworkorder,enterthe
IP AddressandtheIP Port.
10. Clickthe
Additional Settings icon. 
The
Add Workorder Additional Settings screenappears,asshowninFigure 2‐39for
Standard,Pinnacle Standard,andOmneon StandardworkordersandforMulti-File
Standard
,Mono-only Standard,andallHot Folderworkorders(includingPinnacle,
Omneon,andGrass Valleyhotfolders).
Figure 2-39
Figure 2-39 Additional Settings Screens
11. EnterthePriorityforyourworkorderbytypinganumericvalue.
Ifyouwantthesystemtoprocessaworkorderfirstinthequeue,enter
1.Fornumerous
workorderswiththesamepriority,thesystemsetsthequeueusingthe
Start At entries,
asexplainedinstep12.
Note: Forcompletedetailsonenteringapathusingtheabovethree
methods,seeSection A.3.
Standard, Pinnacle Standard, and Omneon Standard work orders
Multi-File Standard, Mono-only Standard,
and all types of Hot Folder work orders