Specifications

Creating a Work Order
Dolby
®
DP600 Program Optimizer Manual 35
4. Selecttheworkorderprofileyouwanttousetoprocessyourfiles,thenclick
ok.
5. Clickthe
Sourcefield.
The
Enter Path screenappears,asshowninFigure 2‐38.
Figure 2-38
Figure 2-38 Enter Path Screen
Inthisscreen,youcanenterthepathtothefilesorfolder(forahotfolder)thatyou
wanttodesignateforprocessing.Beforeenteringapath,besureyou’ reconnectedto
anactivenetwork,andthensetupasharedfolderforallauthorizedusers,asdescribed
inSection A.1
.
Ifyouaresettingupa
Multi-File Standard,Mono-only Standard,orMono-only Hot Folder,
the
Enter Path screendisplayssomeadditionaldataentryfields,asdescribedin
Section A.3.4.
Youcanenterapathusinganyofthefollowingmethods:
•EnteraURL(directly)
TypethedesiredURLinthe
URLfield.YoumustpreencodeyourURL entry,
whichcannotincludetheusername/password/domaininformationinthe
URL
field(forexample,smb://dp600/users/common/hot_folder/).Ifnecessary,youcan
entera
Username,Password,and Domain (SMBonly)inthecorrespondingfields.
AfterenteringtheURL,click
ok.
•Browsetothedesiredlocation(notsupportedonGrassValleyServers)
Click
browsetodisplaytheSelect Protocolscreen(iftheURLfieldisblank)and
selecteither 
Windows Share/SMBorFTP or SFTP,thenclicktherightarrowand(if
necessary)entera
Username,Password,andDomain (SMBonly)intheEnterUser
Credentials
screen.ClicktherightarrowandenterapathintheEnter Server
Details
screen.ThenclickfinishtodisplaytheSelect Filescreen,clickonthe
desiredfileorfolderandclick
ok.Ifyouwanttocreateabookmark,clickonthe
desiredfileorfolderinthe
Select Filescreen,clickadd,thenclickok.Ifyouclick
browse andthe URLfieldisnotblank,thesystemattemptstobrowsetothe
enteredURL.
Note: SupportedfilesystemprotocolsincludeFTP,SAMBA/CIFS,and
SFTP.