Specifications

18 Dolby
®
DP600 Program Optimizer Manual
Using the DP600
15. IfyouwanttouseaNetworkTimeProtocol(NTP)server,pressthe
NTPbox.Ifnot,
followsteps18–22toenterthedateandtimeandyourtimezone.
The
Primary time serverandSecondary time server(optional)fieldsappearfortheNT P
setup.
Figure 2-13
Figure 2-13 NTP Settings Fields
16. EnterthedesiredNTPservers usingthedisplayedkeypad,andpresssync time.
YourNTPsettingsappearinthe
Date and Time Informationscreen(shownin
Figure 2‐11).
17. AftersettingupNTP,followsteps20–22toenteryourtimezone.
18. Tosetthedateandtimemanually,pressthe
Date & Timefield.
The
Set Server Date/Timescreenappears,asshowninFigure 2‐14.
Figure 2-14 Set
Figure 2-14 Set Server Date/Time Screen
19. Presstheupanddownarrowsaboveandbeloweachfieldtosettheserverdateand
time,thenpress
ok.