Specifications

Starting the System for the First Time
Dolby
®
DP600 Program Optimizer Manual 15
8. IfyouspecifiedastaticIPaddress,therespectivefieldsarenowactive.Makeyour
entriesbypressingonthe
IP Addressand Netmaskfieldstodisplaythecorresponding
numberpadscreens,thenpressontheappropriatenumbers(seethegatewayaddress
numberpadinstructionsdescribedinstep5).Alternatively,youcanpressonthefield,
andthenusetheUSBkeyboardtomakeyourentries.
9. Inthe
DNS Settings box,pressonthePrimary DNSandSecondary DNSfieldsandenter
thedesiredsettings.
10. Press
OKtosaveyournetworkconfiguration.
The
Network Informationdialogbox(showninFigure 2‐4)reappearswithyournetwork
settings,exceptforyouruniquehostname.Youneedtorebootthesystemtodisplay
thenewhostname.
11. Press
ToolsintheNetwork Informationscreen.
The
Network Toolsdialogboxappears,asshowninFigure 2‐8 .Inthisscreen,youcan
enteraremotehostandperformpingortracerouteoperationsbypressingthe
respectivebutton(seeFigure 2‐9andFigure 2‐10).
Figure 2-8
Figure 2-8 Network Tools Dialog Box