Specifications

Dolby
®
DP600 Program Optimizer Manual 11
Chapter 2
Using the DP600
2.1 Installing the DP600 Hardware
ToinstalltheDolby
®
DP600:
1. ConnectoneendoftheprovidedEthernetcabletotheEthernetport(port0)onthe
DP600rearpanel.
2. ConnecttheotherendoftheprovidedEthernetcabletoyournetwork.
3. Connectbothpowersuppliestoapowersourceusingtheprovidedpowercables.
Figure 2-1
Figure 2-1 Connect DP600 to Network
4. ConnecttheprovidedUSBkeyboardtotheDP600front‐panelUSBportoroneofthe
rear‐panelUSBports.Typically,wheninitiallyconfiguringthesystem,youusethe 
touchscreen,asexplainedinSection 2.2,butyoucanalsousethekeyboard.
Figure 2-2
Figure 2-2 Connect DP600 Keyboard (Front-Panel Connection)
Note: SomeearlymodelshavetwoEthernetports.ThelowerEthernetportis
nonfunctionalontheseunits.
Connect Ethernet port to network
Connect power
Rear-panel USB ports
!
4
3
2
1
DP600 Program OptimizerDP600 Program Optimizer
!
Connect provided USB keyboard here or in rear panel