7" Wide Touch Screen In-Dash Fully Motorized TFT Monitor /DVD/AM/FM/Bluetooth OWNER’S MANUAL
TABLE OF CONTENTS Table of Contents…………………………………….…………….………………………..1 Safety Information………………………………………………….………………………2 Features…………………………………………………………….………………………4 Accessories……………………………………….…….………………………………….5 Wire Connection……………...……………………………..……………………………….6 Unit Installation and Removal………………………….….………………………………10 Front Panel………………………………………………………..…..……………………15 Remote Control……………………………………………………………………………19 Touch Screen Operations………………………………………………….……………24 Touch Screen Calibration…………………………………….
SAFETY INFORMATION PLEASE READ COMPLETELY AND BECOME FAMILIAR WITH THE CONTENTS OF THIS MANUAL BEFORE INSTALLATION AND OPERATION OF THIS UNIT, AND KEEP IT CAREFULLY FOR FUTURE REFERENCE. This unit is a class 1 laser product. The laser beam may cause hazardous radiation if exposure to laser system directly. Do not attempt to disassemble the unit personally. This unit has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard.
Cautions: To reduce the risk of fire or electric shock, and annoying interference, use only the recommended accessories. While driving, keep the volume level low enough to be aware of road and traffic conditions. Parking in direct sunlight can produce very high temperatures inside your vehicle. Give the interior a chance to cool down before starting playback. Do not use any chemical solvent, cleaning agent or corrosive detergent to clean away dirt on the surface of the TFT monitor screen.
FEATURES Single Din A/V Source Unit w/ 7” Flip-Up TFT-LCD Touch Screen & Bluetooth Connection • Motorized TFT-LCD Telescopes Forwards/Backwards w/ Pre-Set Angles • Detachable Theft Deterrent Front Panel Flips Down for DVD Loading • Accepts Add-On GPS Navigation Module, NAVIBOX-1 • Accepts Add-On Digital TV Tuner Module, DTV-1 • Car-Spec DVD Transport for Extreme Temperature Exposure • Playback from DVDR/RW & CDR/RW, Including VCD, MP3, MP4 & DiviX • Recall Memory for Last DVD Position • i-Pod Input Control
ACCESSORIES 1 Bolt and Nut M5 x 1 5 Power Wire x 1 9 Trim Bezel x 1 13 AUX Cable x 1 2 3 Back Strap x 1 M5X5 Screws x 4 6 Keys x 2 4 7 Remote Control x 1 8 Mounting Sleeve x 1 Operational Manual x 1 10 11 iPod Cable x 1 (Optional) Slipcover x 1 14 USB Cable x 1 -5- 12 External Microphone x 1
WIRE CONNECTION Cautions: -To prevent short circuits, remove the key from the ignition and disconnect the terminal of the battery. -Make the proper input and output cable connections for each unit. -Connect the wiring harness cables in the following order: ground wire, battery wire, ignition wire. -Reconnect the terminal of the battery. -Do not connect the yellow wire of this product directly to the battery terminal. -Do remember to connect the red wire of this product to the ACC.
1. RADIO ANTENNA ADAPTER IPOD ADAPTER ANALOG TV ANTENNA（OPTIONAL） NAVI ADAPTER（OPTIONAL） AUDIO /VIDEO OUTPUT & INPUT DIGITAL TV ADAPTER（OPTIONAL） 2.
Brake Control Connect the brake control wire AUTO_ANT (see Wiring Diagram). It is necessary to connect the Brake Control wire to the Hand-brake switch of the car. While driving, the TFT monitor will display the alarm picture (see as follows) in order to ensure the safety. Under the Rear View Mode, the Brake Control function is no effective. Telephone Mute Control (Optional) Connect the telephone mute control wire TEL_MUTE (see Wiring Diagram).
Wiring Diagram -9-
UNIT INSTALLATION AND REMOVEL Please read all of the instructions before beginning the installation. Recommend having your unit installed by a professional installation shop.
Installation Method 1: 1 Install the mounting sleeve into the dashboard. 2 Bend the claws into place to secure the sleeve. 3 Slide the units into the mounting sleeve. 4 Install the trim bezel onto the unit. 5 Sketch map when installation finished.
Removal Method 1: 1 Detach the trim bezel. 2 Insert the keys into the aperture between the unit and the mounting. 3 Pull the unit out of the mounting sleeve. - 12 - 4 Sketch map when removal finished.
Installation Method 2: 1 Tighten the bolt onto the rear panel of the unit. 2 Tighten the back strap onto your car inside the dashboard. 3 Place the unit into the dashboard; make the bolt bar across back strap; and then fix the bolt by the Nut M5. 4 Screw the unit on the car on the two sides with M5×5 SCREWS. 5 Install the trim bezel onto the unit. 6 Sketch map when installation finished.
Removal Method 2: 1 Detach the trim bezel. 2 Unscrew the unit off the car on the two sides. 3 Unscrew the Nut M5 screw on the rear side of the unit and pull out the unit. 4 Sketch map when removal finished.
FRONT PANEL 1. POWER 4. AUX IN 7. BAND 10. F. FWD 13. STOP 16. RESET 19. DISPLAY 22. IN 2. VOLUME / EQ 5. MIN USB 8. PLAY / PAUSE 11. PREV 14. REL 17. ANGLE + / END CALL 20. OPEN / CLOSE 23. MENU / SYSTEM - 15 - 3. MUTE / LOUD 6. REMOTE 9. F. REV 12. NEXT 15. EJECT 18. ANGLE - / CALL 21. OUT 24.
1. Power When ACC is on, press to turn the unit on; hold on pressing the button to turn off the unit. When the unit is on, press to switch between different modes. 2. Volume / EQ Rotate the button clockwise / anticlockwise to increase / decrease the volume. Press vertically to switch the EQ setting as following: USER – POP – CLASSIC – ROCK – JAZZ – USER 3. Mute / Loud Press to switch off the sound; press it again to resume to the previous volume level. Hold on pressing the button to activate LOUD on / off.
15. Eject Press to eject / load a disc. 16. RESET Press and hold this button to switch back to all the original factory settings. Keep in mind this will erase all your preset radio stations and any EQ settings you may have made and saved.ٛ 17. ANGLE + / END CALL / 18. ANGLE + / CALL Adjust the view angle of the monitor to choose the best displaying effect.
Halt Self-protection Press the [OPEN] button Shut down the ACC and restart Retraction Extending Retraction Extending Retraction Extending Turning downward and retract ion Turning downward and retract ion Turning downward and retract ion While extending While retraction While turning upward While turning downward Stop at the halt place and retract after 3 seconds Turning downward and retraction Turning upward FRONT PANEL DISPLAY 1.
REMOTE CONTROL 1. POWER/SOURCE 2. MUTE 3. NUMBER BUTTONS 4. MENU / * 5. AUDIO / # 6. EQ / LOUD 7. UP (TUNE UP)/PTY 8. LEFT (SEEK DOWN) 9. ENTER / BAND 10. PROGRAM 11. DOWN(Tune Down)/AF 12. RANDOM / TRANSFER 13. PREVIOUS 25. SYSTEM / NAVI 14. SLOW / END CALL 26. F.FWD 15. TITLE / PBN 27. RIGHT(Seek up) 16. ZOOM / CALL 28. STOP 17. SUBTITLE / PBP 29. D.ANGLE 18. OPEN / CLOSE / P.ANGLE/ EJECT 19. SETUP 30. PLAY / PAUSE 20. VOLUME+ 31. NEXT 21. VOLUME32. A-B / PHONE PAIR 22. DISPLAY 33. REPEAT / PHONE 23.
1. [POWER/SOURCE] When ACC is on, press the button to turn the unit on; hold on pressing the button to turn off the unit. When the unit is on, press to switch between different modes. 2. [MUTE] Press to switch off the sound; press it again to resume to the previous volume level. 3. [NUMBERS 0~9] Radio Mode, press the buttons 1~6 to select a preset station, hold on touching to store current radio frequency to the preset station.
9. [BAND/ENTER] DVD Mode, press to confirm the selection. Radio Mode, press to switch the wave band as following: FM1 – FM2 - FM3 - AM1- AM2 - FM1 TV Mode, press to switch the TV audio as following: NTSC – PAL/BG – PAL/I – PAL/DK – NTSC Hold on pressing to switch the TV system area as following: USA – CCIR – ITALY – AUS – NZ – USA Bluetooth Mode, press the button to turn on/off selected item. 10. [PROGRAM] DVD Mode, press to enter / exit the PROGRAM Function when playing the DVD, VCD, CD disc. 12.
19. [SETUP] DVD Mode, press to enter/ exit the DVD SETUP menu. 20. [VOL+] / 21. [VOL-] Press to increase / decrease the volume. Hold on pressing the button to keep increasing/decreasing the volume. 22. [DISPLAY] DVD Mode, press to display current playback information. Bluetooth Mode, press to return to the previous page. 23. [PBC/AST/CLEAR] DVD Mode, press to select the PBC function on / off when playing VCD disc.
33. [REPEAT/PHONE] DVD Mode, press to repeat as CHAPTER-TITLE-ALL-REPEAT OFF when DVD playback. Press to repeat as TRACK-ALL-REPEAT OFF when VCD/CD playback. Press to repeat as REPEAT ONE-REPEAT ALL-REPEAT OFF when MP3 playback. Bluetooth Mode, press to break off or connect cell phone with the unit. 34. [P/N/AUDIO PLAYER] DVD Mode, press to switch the video output (PAL/NTSC) when playing DVD disc. Bluetooth Mode, press to enter into AUDIO PAIRING. 35.
TOUCH SCREEN OPERATIONS TOUCH SCREEN CALIBRATION When “Power Off”, press the buttons 2, [BAND] of remote control to enter the CALIBRATION page: To touch the points from 1 to 5 until the points change to next cross by using a ballpoint pen or pencil. After all 5 points have been touched, the unit has been finished the CALIBRATION. If the calibration is succeeded, the unit would display the following page and then power off automatically.
MAIN MENU 1, Touch to access the DVD mode. 2, Touch to access the RADIO mode. 3, Touch to access the NAVI mode. 4, Touch to access the i-POD mode. 5, Touch to access the ATSC mode. 6, Touch to access the SD CARD mode. 7, Touch to access the Bluetooth mode. 8, Touch to access the 2nd page of MAIN MENU. 1, Touch to access the USB mode. 2, Touch to access the AV IN mode. 3, Touch to access the AUX IN mode. 4, Touch to access the SYSTEM PARAMETERS SETUP. 5, Touch to access the DIM function.
RADIO OPERATIONS Touch the [RADIO] icon to access to Radio Mode. 1. Current Source Indicator Displays the source currently playing, touch to return the main menu. 2. Mute Touch to switch off the sound; touch it again to resume to the previous volume level. 3. Preset Stations Touch to select a preset station, hold on touching to store current radio frequency to the preset station. 4. BAND Touch the icon to switch the FM/AM wave band as following: FM1 - FM2 - FM3 - AM1- AM2 - FM1 5.
DVD PLAYER OPERATIONS 1, Touch the [DVD] icon to access to DVD Mode if disc inside. 2, The unit will be switched to DVD Mode automatically when inserting the disc. 3, The unit will switch to RADIO Mode automatically if disc ejected. 1. Current Source Indicator Displays the source currently playing, touch to return the main menu. 2. Mute Touch to switch off the sound; touch it again to resume to the previous volume level. 3.
1. Capture Image Touch to capture the current playing image and store into memory for background or screen saver. 3. Display Touch to display the current playback information on the screen. 4. Repeat Touch to repeat as CHAPTER-TITLE-ALL-REPEAT OFF when DVD playback. Touch to repeat as TRACK-ALL-REPEAT OFF when VCD/CD playback. Touch to repeat as REPEAT ONE-REPEAT ALL-REPEAT OFF when MP3 playback. 5. Direction Arrows Keyboard Touch to display the [Direction Arrows Keyboard] on the left side of screen.
2. Setup Touch to access the DVD SETUP menu. Touch the [<] / [>] icons to switch the main menus as following: SYSTEM – LANGUAGE – VIDEO – SPEAKER – DIGITAL Touch the [∧] / [∨] icons to access the submenus from main menus. Touch the [∧] icon on the top submenu or [∨] icon on the bottom of submenu to exit the submenus to main menus. Touch the [∧] / [∨] icons to select the submenus as your need. Touch the [>] or [ENTER] icons to access the items of submenus. Touch the [<] icon to exit the items of submenus.
LANGUAGE SETUP OSD LANGUAGE Following options are available for the OSD LANGUAGE: ENGLISH GERMAN SPANISH FRENCH PORTUGUESE ITALIAN RUSSIAN DUTCH SWEDISH KOREAN DANISH NORWEGIAN POLISH HUNGARIAN AUDIO LANGUAGE Following options are available for the AUDIO LANGUAGE: ENGLISH GERMAN SPANISH FRENCH PORTUGUESE ITALIAN RUSSIAN DUTCH SWEDISH KOREAN DANISH NORWEGIAN POLISH HUNGARIAN SUBTITLE LANGUAGE Following options are available for the SUBTITLE LANGUAGE: ENGLISH GERMAN SPANISH FRENCH PORTUGUESE ITALIAN RUSSIAN
CONTRAST Following options are available for the CONTRAST: 0 2 4 6 8 10 12 HUE Following options are available for the HUE: -6 -4 -2 0 +2 +4 +6 SATURATION Following options are available for the SATURATION: 0 2 4 6 8 10 12 SPEAKER SETUP DOWNMIX Following options are available for the DOWNMIX: LT / RT STEREO VSS FRONT Following options are available for the FRONT: LARGE SMALL DIGITAL SETUP DYNAMIC RANGE Following options are available for the DYNAMIC RANGE: FULL 6/8 4/ 8 2 /8 OFF DUAL MONO Following option
BLUETOOTH OPERATIONS (Optional) Touch the [BLUETOOTH] icon to access the Bluetooth Mode: 1. Current Source Indicator Displays the source currently playing, touch to return the main menu. 2. Mute Touch to switch off the sound; touch it again to resume to the previous volume level. 3. Phone Call Touch to enter the phone calling. 4. Phone Book Touch to enter the phone book lookup. 5. Audio Touch to enter the audio device operation. 6. Settings Touch to enter the Bluetooth settings.
1. Auto Answer Touch to select auto / manual answer when call is coming. 2. Phone Connect Touch to select auto / manual phone connect when return back the car. 3. Phone Pairing Touch the icon and the below words on information display: Then set the phone to pair with unit. When paring finished, set the phone connect with unit, then you can see the phone name on information display. Touch the icon again to cancel the pairing and the below words on information display: 4.
PHONE CALL 1. Call Touch to call a number or receive a cell phone call. Touch to call the last number if no number input. 2. Clear Touch to cancel or clear the numbers you have input. 3. End Call Touch to reject or hang up a call. 4. Transfer When talking the phone, touch to transfer the call between the unit and cell phone. 5. Number Keys Touch the icons to input a phone number. 6.
CALL IN When call in, you will see the below image: When talking, you will see the below image: When end the call, you will see the below image: - 35 -
PHONEBOOK 1. My Phonebook The phone numbers are stored in phone. 2. SIM Phonebook The phone numbers are stored in SIM card. 3. Dialed Call The phone numbers are dialed in phone. 4. Received Call The phone numbers are received in phone. 5. Missed Call The phone numbers are missed in phone. 6. Transfer When talking the phone, touch to transfer the call between the unit and cell phone. 7. Call Touch to call a selected number from phonebook or to receive a cell phone call. 8.
Phone Number List Touch the icon 1~5, when item is changed to yellow color, the item is selected. And touch it again and the item is changed to green color, the operation is active and you will see the below image: 1, Information Display You will see the phone number of the item in blue color. 2, Phone Number If this number is stored, you will see the name; if not, you will see the phone number. Touch the icon when item is changed to yellow color, the item is selected. 3.
IPOD OPERATIONS (Optional) 1, Touch the [IPOD] icon to switch IPOD Mode if iPod connected. 2, The unit will switch to IPOD Mode automatically if iPod connected. 3, The unit will switch to RADIO Mode automatically if iPod disconnected. Music Page Under the Music Page, it is not effective for the controller of iPod itself, use the keys of unit to control the operation and all operations are same as DVD Mode. 1. Current Source Indicator Displays the source currently playing, touch to return the main menu. 2.
Video Page Under the Video Page, use the controller of iPod itself to control all operations of iPod including play music, videos and view pictures. 1. Music Touch the icon to access the music page. NOTE: The TV Output in iPod SETUP should be effective, and the pictures & videos could be displayed on the TFT monitor of unit. SD CARD OPERATIONS 1. Touch the [SD CARD] icon to access to SD CARD Mode if SD / MMC Card inserted. 2. The unit will switch to SD CARD Mode automatically if SD / MMC Card connected. 3.
AV IN OPERATIONS Touch the icon “AV IN” to enter the AV IN Mode: 1. Current Source Indicator Displays the source currently playing, touch to return the main menu. 2. Mute Touch to switch off the sound; touch it again to resume to the previous volume level. NOTE: There are 2 RCA Audio Inputs & 1 RCA Video Input for unit. AUX IN OPERATIONS Touch the icon “AUX IN” to enter the AUX IN Mode: 1. Current Source Indicator Displays the source currently playing, touch to return the main menu. 2.
NAVI OPERATIONS (Optional) Touch Screen Calibration When 1st time to enter NAVI mode, you will see the calibration screen. Please touch the points from 1 to 5 by using a ballpoint pen or pencil. To verify the calibration, please touch the points from 1 to 5 again.
The Touch Screen is restored to their default positions. Touch anywhere of panel to finish the calibration and go to the following screen: Read information and touch “I agree” button at the bottom of the screen, then enter the NAVI mode. NOTE: If change the NAVIbox to connect another unit, please take out the SD card from the NAVIbox and connect with computer, the following screen is displayed on computer: Delete the file “calib.ifo” only.
Go to NAVI mode Touch the icon “NAVI” to enter the NAVI Mode if NAVIBOX connected: Following screen will be displayed: Read information and touch “I agree” button at the bottom of the screen. Enter the NAVI mode by main menu, the NAVI operations are effective only, all other processes are disable such as Radio, CD etc. NOTE: Under NAVI mode, please view all operations by Navigation Device NAVIBOX-1 User’s manual.
Quick Access Key [NAVI] Under any working mode, press the [NAVI] button to switch to NAVI mode; press the [NAVI] button again to return the previous working mode. For example, under Radio mode, press the [NAVI] button to switch to NAVI mode; press the [NAVI] button again to quit the NAVI mode and return back the Radio mode. Enter the NAVI mode by Quick Access Key, the previous working mode is still working on background.
ATSC OPERATIONS (Optional) 1. Current Source Indicator Displays the source currently playing, touch to return the main menu. 2. Mute Touch to switch off the sound; touch it again to resume to the previous volume level. 3. Return Touch to return submenu to menu. 4. Menu Touch to display the menu. 5. Exit Touch to exit the menu. 6. Direction Arrows Keyboard Touch the arrows icons to select the item, touch the [ENTER] icon to confirm the selection.
SYSTEM PARAMETERS SETUP Touch the [SYSTEM] icon to enter the System Parameters Setup. SCREEN SETUP 1. Contrast Touch [UP] / [DOWN] icons to adjust the CONTRAST parameters (Range: -9 to 9); 2. Tint Touch [UP] / [DOWN] icons to adjust the TINT parameters (Range: -9 to 9); 3. Color Touch [UP] / [DOWN] icons to adjust the COLOR parameters (Range: -9 to 9); 4. Brightness Touch [UP] / [DOWN] icons to adjust the BRIGHTNESS parameters (Range: -9 to 9); SOUND SETUP 1.
3. Sub-Woofer Frequency Touch [UP] / [DOWN] icons to switch the SUB-WOOFER frequency as following: OFF — 80Hz — 120Hz — 160Hz — OFF 4. Sub-Woofer Volume Touch [UP] / [DOWN] icons to adjust the SUB-WOOFER volume parameter (Range: 0 to 15); 5. Buzzer Touch to turn Buzzer on or off; 6. Balance / Fader Touch [LEFT] / [RIGHT] icons to adjust the BALANCE parameters (Range: -9 to 9); Touch [FRONT] / [REAR] icons to adjust FADER parameters (Range: -9 to 9); 7. X-Bass Touch to turn X-Bass on or off; CLOCK SETUP 1.
1. Source Images List Touch [UP] / [DOWN] icons to select the image captured from DVD, SD card and USB. 2. Screen Saver Images List Touch [UP] / [DOWN] icons to select the image of screen saver. 3. Desktop Touch to set the selected image of source images list as desktop image. 4. Del Touch to delete the selected image of screen saver images list, or delete the selected image of source images list. 5. Add Touch to add the selected image of source images list as screen saver. 6.
SPECIFICATIONS GENERAL Supply Voltage Load Impedance Max Power Output Bass 100Hz Treble 10KHz Dimensions (approx.) Mounting (approx.) FM TUNER Frequency Range IF Usable Sensitivity Stereo Separation Frequency Response AM TUNER Frequency Range IF Usable Sensitivity TV TUNER (Optional) Frequency Range : 14.4V DC (11-16V allowed) : 4Ω per channel : 50W x 4 : ≥ 10dB : ≥ 10dB : 180 x 188 x 59 mm (d/w/h) : 160 x 178 x 50 mm (d/w/h) : 87.5 – 108 MHz (Europe/Asia) 87.5 – 107.9 MHz (USA) : 10.
TROUBLE SHOOTING If any of problem persists after checking the below list, Please consult your nearest service dealer. Never attempt to disassemble and repair unit personally.
Problem Cause Action TFT MONITOR No video display (when in reverse) Front panel will not open/close Flashing image or interference appears on screen Prolonged image or improper height/width ratio display Touch screen function disorder if the position is excursion Reverse circuit not connected Check connections at reverse lamp Vehicle is not in reverse Select reverse gear Front panel obstructed Remove the obstruct and press OPEN to resume the monitor open/close sequence DVD is not compatible with c
DISC NOTES ■ Disc formats supported by this player Handling and Cleaning ● Dirty, dusty, scratched or warped discs will cause misoperation. ● Do not place stickers or make scratches on discs. ● Do not warp discs. ● A disc should always be kept in its case when not in use to prevent from damage. ● Do not place discs in the following places: 1. Direct sunlight. 2. Dirty, dusty and damp areas. 3. High temperature places. 4. On the seats or dashboard. Disc Cleaning Use a dry soft cloth to wipe the surface.
