XDVD700 INSTALLATION/OWNER’S MANUAL DVD Multimedia Receiver with 7” Touch Screen Display TOUCH Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
XDVD700 PREPARATION Table of Contents Page DVD Region Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparation/Mounting/Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote Control Overview . . . . . . . . . . . . . . . . . . . . . .
XDVD700 PREPARATION WARNING Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.
XDVD700 OPERATION Safety Information Please read all instructions carefully before attempting to install or operate. Due to its technical nature, it is highly recommended that your DUAL XDVD700 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only. Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction.
XDVD700 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Slide the unit out of the mounting sleeve. • Install mounting sleeve into opening, bending tabs to secure.
XDVD700 INSTALLATION Expanded Wiring Diagram - Inputs/Outputs Wiring Notes: Subwoofer output The SUBWOOFER audio output (Blue RCA) is active in all audio modes and must be connected to an external amplifier. NEED HELP?? Call our Technical Service Hotline, 1-866-382-5476. Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction.
XDVD700 INSTALLATION Wiring Diagram - Optional A/V Connections 6jY^d >ceji
XDVD700 OPERATION IR Remote Preparation To first use the IR Remote control, you must first pull the battery insulation tape out Notes: • Remove the battery if the remote will not be used for a month or longer • Remove and dispose of battery properly Insert or replacing the Battery: Remove the battery holder Remove the battery from the battery holder Install the new battery Make sure to keep the (+) side up Insert the battery holder • CAUTION!!! Do not store battery with metallic objects or material
XDVD700 OPERATION Control Locations - Monitor Closed 1 2 4 3 5 6 16 15 14 13 12 11 10 9 8 1 Band 9 2 Auto Store/Preset Scan 10 Stop 3 Secondary LCD 11 Chapter/Track Up 4 Display 12 Chapter/Track Down 5 Open/Close Monitor 13 Fast Forward 6 Eject 14 Fast Reverse 7 Rotary Encoder/Enter 15 Mute 8 Mode 16 Power/Volume 7 Play/Pause/Scan Monitor Notes: • • • T his model incorporates a motorized moving monitor.
XDVD700 OPERATION Control Functions - Monitor Closed BAND Press BAND to increment from FM1, FM2, FM3, AM ] FM1. The FM band indicator is shown as "1", "2" or "3" and is located on the far left side of the secondary LCD. The AM band indicator is shown as "A". AS/PS (Auto Store /Preset Scan) Press AS/PS momentarily to start station PRESET SCAN function, Press AS/PS for 2 seconds to start AUTO STORE station preset function in current BAND.
XDVD700 OPERATION Control Locations - Monitor Open 1 2 3 4 5 1 Disc-in indicator - Red = Disc inserted, White = No disc. 2 ANGLE - Press to decrease the monitor view angle. 3 ANGLE - Press to increase the monitor view angle. 4 INFO - Press to display DVD INFO. Press and hold to access the Picture Menu and adjust the CONTRAST and BRIGHTNESS. 5 Press to RESET system. Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving.
XDVD700 OPERATION Control Functions - Monitor Open Disc-in indicator Monitor Angle pq White = No disc Red = Disc inserted Press ANGLE p to increase the monitor view angle. Press ANGLE q to decrease the monitor view angle. Notes: • Do not attempt to move the monitor up/down by hand - severe damage will occur. Use the front panel buttons or the remote control only. • The color of the LCD monitor varies between viewing angles. Select the angle with the most optimum view for your location.
XDVD700 OPERATION Control Locations - Remote 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 1 Mode 16 Info 31 Root 2 Mute 17 Search 32 Repeat 3 Open/Close 18 Key #0 33 Chapter/Track/Seek Down 4 Power 19 Band/Stop 34 Chapter/Track/Seek Up 5 Key #1 20 Audio Select 35 Fast Reverse/Manual Tune Down 6 Key #2 21 Escape 36 Fast Reverse/Manual Tune Up 7 Key #3 22 4-Way - Up 37 Zoom 8
XDVD700 OPERATION Control Functions - Remote Mode Press once to incrementally select desired source. Mute Press once to MUTE audio, press again to return audio. Open/Close Power Keys 0-9 Volume Up Volume Down Info Search Band / Stop Audio Select Escape 4-Way -Up/Down/Left/Right Menu Picture OK Repeat A-B Title Menu Root Repeat Chapter/Track Down Chapter/Track Up Press once to open monitor, press again to close the monitor. Press once to turn the unit on, press again to turn unit off.
XDVD700 OPERATION General Operation Power On/Off Monitor Open/Close Press POWER momentarily to turn the unit on, the unit will beep. Press and hold POWER for more than 2 seconds to turn the unit off. Note: EJECT will still function even if POWER is off. Press OPEN to open or close the monitor. The unit will emit a confirmation beep upon opening or closing. Be careful not to not touch or obstruct the monitor movement during the open/close sequence.
XDVD700 OPERATION General Operation Mode Press MODE to select between TUNER, DVD and AUX IN inputs. Modes of operation are indicated in the OSD (On Screen Display) and secondary LCD. Optional Mode Selection With the monitor open, press the top left corner of the screen to display the OSD menu. Press TUNER, DVD or AUX IN icon to select the desired source. Volume Programmable Turn-on Volume Mute Audio Adjustment (from front panel) Adjust VOLUME using rotary encoder or the VOL buttons.
XDVD700 OPERATION General Operation INFO/PIC BRIGHTNESS/CONTRAST BAND AS/PS (Auto Store /Preset Scan) DISP EJECT RIGHT ROTARY MODE TRACK/SEEK UP TRACK/SEEK DOWN STOP PLAY/PAUSE FAST FORWARD/TUNE UP FAST REVERSE/TUNE DOWN SECONDARY LCD Press INFO button for 1 second to display DVD disc information. Press and hold INFO for 2 seconds to access the Picture Menu and adjust the CONTRAST and TFT LCD BRIGHTNESS. Press ANGLE p to increase, ANGLE q to decrease or use VOLUME rotary to adjust the levels up or down.
XDVD700 OPERATION General Operation Main Menu Access There are three methods to access the MAIN menu: • Press the ENTER button on the right ROTARY knob. • Press the MENU button on the remote control. • Touch the upper left corner of the touch screen. 1 2 3 4 L 6 Touch Access Buttons 1) 2) 3) 4) 5) 6) Rapid Dial Rotary Encoder 5 Touch to access AM/FM TUNER mode. Touch to access CD/DVD mode, (CD/DVD must be inserted). Touch to access AUX INPUT mode. Touch to go BACK to previous screen.
XDVD700 OPERATION General Setup Menu General Setup Menu • • • L Upon entering Setup Menu, the General tab is the default display. Select desired parameter to change. Page will return back to previous screen after 10 seconds of inactivity or by pressing the BACK button. Note: Default anti-theft password is 0000.
XDVD700 OPERATION General Setup Menu Select Radio Region From the General Setup Menu, press Radio. Touch the setting for your region. L Video Out From the General Setup Menu, press Video Out. Touch the desired setting (Disable or Enable). L TFT Auto Open From the General Setup Menu, press TFT Auto Open. Touch the desired setting to determine if the TFT panel will open automatically or manually.
XDVD700 OPERATION General Setup Menu Clock Mode From the General Setup Menu, press Clock Mode. Touch the desired setting to choose a 12-hour or 24-hour clock display. L Clock Adjust Anti-theft Code From the General Setup Menu, press the current time on the Clock line, and a keypad will appear. Enter two numbers for the hour and two numbers for the minute. For example, 8:05 would be entered "0805". Press OK to confirm, then press AM or PM to select the AM or PM designation.
XDVD700 OPERATION General Setup Menu Anti-theft On/Off From the General Setup Menu, press Anti-Theft. Press On to activate this feature. L Note: Choose a personal 4-digit password for the unit. Write it down, and keep it in a safe location. To change the password, the Anti-Theft feature must be activated as described above. Once Anti-Theft is set to on, press "----". When the keypad appears, enter the new four-digit code and press OK. Load Factory L From the General Setup Menu, press Load Factory.
XDVD700 OPERATION Screen Setup Menu Screen Setup Menu L • • • Press the Screen tab to access Screen Setup Menu. Select desired parameter to change. Page will return back to previous screen after 10 seconds of inactivity or by pressing the BACK button.
XDVD700 OPERATION Screen Setup Menu Screen Saver From the Screen Setup Menu, press Screen Saver. Touch On to activate the screen saver or Off to deactivate it. L Touch Screen Calibrate From the Screen Setup Menu, press TS Calibrate. Touch Yes to enter Touch Screen Calibration Mode. Follow the on-screen prompts to calibrate. L Note: For proper calibration you must touch each pointer for 2 seconds.
XDVD700 OPERATION Language Setup Menu L Language Setup Menu • • • Press the Language tab to access Language Setup Menu. Select desired parameter to change. Page will return back to previous screen after 10 seconds of inactivity or by pressing the BACK button.
XDVD700 OPERATION Language Setup Menu Audio Language From the Language Setup Menu, press Audio. Select the desired disc audio language. L DVD Menu From the Language Setup Menu, press DVD menu. Select the desired disc menu language.
XDVD700 OPERATION Video Setup Menu L Video Setup Manu • • • TV Shape Press the Video tab to access Video Setup Menu. Select desired parameter to change. Page will return back to previous screen after 10 seconds of inactivity or by pressing the BACK button. From the Video Setup Menu, press TV Shape to select 4:3 or 16:9. NORMAL - 4:3 L View Mode From the Video Setup Menu, press View Mode. Select desired view mode: Fill, Original, Auto Fit or Pan Scan.
XDVD700 OPERATION Rating Setup Menu L Rating Setup Menu • • • Set Password Press the Rating tab to access Rating Setup Menu. Select desired parameter to change. Page will return back to previous screen after 10 seconds of inactivity or by pressing the BACK button. From the Rating Setup Menu, press "----" to enter a password. Enter the password to adjust the rating level. The default rating password is 9991.
XDVD700 OPERATION AM/FM Tuner Operation - OSD Overview 1 2 3 4 5 6 7 8 22 21 9 20 10 11 19 18 Tuner Mode 29 17 16 15 14 13 12 From the main menu, touch TUNER icon on the screen to select AM/FM Tuner mode. 1) Current Source Indicator Displays source currently playing. 2) Tune Frequency - Down Touching this icon will tune the radio to a lower frequency by one frequency step. Touch and hold to continuously tune down.
XDVD700 OPERATION AM/FM Tuner Operation - OSD Overview 8) Clock Indicates current time. 9) Loudness Indicator Indicates loudness setting. 10) EQ Indicator Indicates current EQ preset. 11) Current Station Indicator Indicates current frequency. 12) Display 13) Local / DX Tuning Mode Shows when local or distance tuning is on. 14) Direct Preset Tuning Press to display keyboard and access presets by number. For example, press "2" and "OK" to listen to preset 2.
XDVD700 OPERATION AM/FM Tuner Operation AM/FM Tuner Mode From the main menu, touch TUNER icon to select AM/FM Tuner mode. From the remote control or the front panel: Press MODE until TUNER is displayed on the screen. Band Touch on the screen repeatedly until the desired band is displayed, FM-1, FM-2, FM-3, or AM. Press the BAND button to switch between bands, FM-1, FM-2, FM-3, AM. From the remote control: Press the BAND button.
XDVD700 OPERATION AM/FM Tuner Operation Tuner Mode Preset View L Access Preset View Direct Preset Tuning L L Press DISP to select between standard display and preset view. To select a desired station from the preset station list, touch any of the displayed station frequencies from the list. Use Rapid Dial by turning the right rotary clockwise or counter-clockwise, and pressing in to select the highlighted channel. Use the up and down arrows on screen to scroll between the preset pages.
XDVD700 OPERATION WARNING Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.
XDVD700 OPERATION DVD Operation - Parking Brake Initialization SAFETY WARNING CAUTION! It's Unlawful To Operate A Vehicle While Video is Displayed in The Drivers Viewing Area Engage Emergency Brake To Enjoy Video Front TFT Video Initialization • The video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash video functions will only operate when vehicle is in Park and the PARKING BRAKE is engaged.
XDVD700 OPERATION DVD Operation DVD Region Management Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD700 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. This player has been designed to play back DVD software that has been encoded for specific region areas.
XDVD700 OPERATION DVD Operation - Inserting a Disc DVD Loading Slot Eject button Insert CD/DVD with label facing upwards Inserting a disc With the label facing up, insert a standard size disc into the slot. The disc will automatically begin playback. Other sub-menus may have to be pressed to access the DVD movie/music content. Read the directions of your specific DVD disc for other features.
XDVD700 OPERATION DVD Operation - Touch Screen Controls Hidden Touch Screen Areas A - Displays MAIN menu B - Displays DVD disc information C - Selects PREVIOUS chapter D - Selects NEXT chapter E - Displays the full DVD transport controls F - SEARCH menu L L AREA A Access MAIN Menu AREA B Displays Disc Information Note: A DVD must be inserted to access these functions and features.
XDVD700 OPERATION DVD Operation - Touch Screen Controls 1 2 DVD Transport Controls Area E 3 DVD Mode 4 5 6 7 8 9 From the main menu, touch the DVD icon on the screen to select DVD mode. 1) Title Menu Jumps to the DVD Title menu. 2) Sub-Title Mode Activates sub-titles and cycles between multiple sub-title languages. 3) Play/Pause Touch the 4) Stop 5) Fast Reverse Touch the icon to fast reverse at 2x speed.
XDVD700 OPERATION DVD Operation - Searching a DVD Searching a DVD L Searching by Time, Title or Chapter Touch Area F to bring up the Search Window. The Search Window allows a search for a specific time, title or chapter. Search by TIME example To search for a specific time, touch the --:--:-- area and an on-screen keyboard will pop up. Use the keyboard to enter a time and touch OK. (For example, to skip to 1 hour, 12 minutes and 19 seconds into the DVD, touch: 1 1 2 1 9 OK.
XDVD700 OPERATION DVD Operation Playback Control Touch Area E to bring up the on-screen buttons. Touch to fast forward or to fast reverse. Repeat Mode Touch the Repeat button to repeat either a chapter or title. The first touch activates Repeat Chapter mode and a second touch activates Repeat Title mode. When either mode is active, the Repeat button will be illuminated, and touching it a third time will disable Repeat Mode. Repeat A->B T ouch the A B icon once to select a start point.
XDVD700 OPERATION CD Operation - OSD Overview 1 2 4 5 6 7 8 20 9 19 10 18 17 CD Mode 41 3 16 15 14 13 12 11 From the main menu, touch DVD icon on the screen to select CD mode. 1) Current Source Indicator Displays source currently playing. 2) Fast Reverse icon to fast reverse at 2x speed. Touch the Each touch changes speed from 2x to 4x to 8x to 16x then to 1x play. 3) Play/Pause Touch the 4) Disc Type Indicator Displays the type of disc currently playing.
XDVD700 OPERATION CD Operation - OSD Overview 9) Elapsed Time Indicator Shows how much time has elapsed in the current track. 10) Current Track Indicator Indicates current track. 11) Display 12) Shuffle icon to shuffle all tracks on the disc. This icon will Touch the remain highlighted until touched to disable. 13) Direct Select Keyboard icon to display a numeric keyboard. Enter desired track Touch the number and touch OK to select it. 14) Repeat icon to repeat current track.
XDVD700 OPERATION CD Operation Playing CD-DA discs After inserting a CD disc, files will play in numerical order. Selecting by Keypad Touch to display keypad. Enter desired track number and press OK. L Selecting by Direct Track Access Previous/Next Page Touch desired track for DIRECT TRACK access. Touch Page Up/Down buttons to view additional pages of available tracks.
XDVD700 OPERATION CD Operation Page Up/Down The Page Up and Page Down on-screen buttons can be used to see the rest of the tracks on the CD. Use the Direct Select method to play a desired track. From the remote control: Press to display the next page. Press to display the previous page. Track Select Press Press button to skip to the next track. button to skip to the previous track. From the remote control: Press to skip to the next track. Press to skip to the previous track.
XDVD700 OPERATION CD Operation Shuffle Mode Touch the Shuffle button to shuffle all of the tracks on the CD. The Shuffle button will be illuminated while Shuffle Mode is active. When the button is illuminated, touching it a second time will disable Shuffle Mode. Notes: The shuffled order of the songs is fixed, therefore the Track Select operations will continue to operate properly within the shuffled order.
XDVD700 OPERATION MP3/WMA Operation - OSD Overview 1 2 3 4 5 6 7 8 9 22 10 21 11 20 19 18 MP3/WMA Mode 17 16 15 14 13 12 From the main menu, touch DVD icon on the screen to select MP3/WMA mode. 1) Current Source Indicator Displays source currently playing. 2) Fast Reverse icon to fast reverse at 2x speed. Touch the Each touch changes speed from 2x to 4x to 8x to 16x then to 1x play.
XDVD700 OPERATION MP3/WMA Operation - OSD Overview 9) 10) Elapsed Time Indicator Shows how much time has elapsed in the current song. 11) Current Filename Indicates filename of current song. 12) Display 13) Shuffle icon to shuffle all songs on the disc. This icon will Touch the remain highlighted until touched to disable. 14) Direct Select Keyboard icon to display a numeric keyboard. Enter desired song Touch the number and touch OK to select it.
XDVD700 OPERATION MP3/WMA Operation Page Up/Down The Page Up and Page Down on-screen buttons can be used to see the rest of the songs on the disc. Use the Direct Select method to play a desired song. From the remote control: Press to display the next page. Press to display the previous page. Note: Continued operation of the Page Up and Page Down buttons will display the next and previous pages of available songs in the current folder.
XDVD700 OPERATION MP3/WMA Operation Song Control You can use the Fast Forward or Fast Reverse on-screen buttons to speed up the playback of a song. Each subsequent press of the button will change the speed from normal to 2x to 4x to 8x to 16x and back to 1x. Press Press on to fast forward. on to fast reverse. Note: There is no audio output while song control is active. Shuffle Mode Touch the Shuffle button to shuffle all of the songs on the disc.
XDVD700 OPERATION Media Compatibility Media Compatibility The following types of discs/files are compatible: • CD-ROM (ISO), CD-R, CD-RW, DVD+R/RW, DVD-R/RW • CD-DA, DVD Video • MP3 data • WMA data The following types of discs/files are not compatible: • WMA files that are protected by DRM (Digital Rights Management) • WMA lossless format • Discs recorded with Track At Once or packet writing • MP3 PRO format • MP3 playlists • WAV format • WMV format • JPG format • DivX format • AVI format • MPG format Som
XDVD700 OPERATION Media Compatibility Additional MP3/WMA Information An internal buffer provides ESP (Electronic Skip Protection) to virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-DA or .WAV) and MP3/WMA files, the unit will play the MP3/WMA files only. Only MP3 files with filename extension (.mp3) can be played. Only WMA files with filename extension (.wma) can be played. Do not attempt to play discs which contain non-MP3/WMA files with the MP3/WMA extension.
XDVD700 WARRANTY Limited One Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase. Dual Electronics Corp.
XDVD700 OPERATION Troubleshooting Problem Unit will not turn on (no power) Cause Yellow wire not connected or incorrect voltage Check connections for proper voltage (11~16VDC) Red wire not connected or incorrect voltage Black wire not connected Check connection to ground Fuse blown Replace fuse Unit has power (but no sound) Speaker wires not connected Check connections at speakers One or more speaker wires touching each other or touching chassis ground Insulate all bare speaker wires from each ot
XDVD700 OPERATION Specifications DVD Player Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >60dB D/A converter: 24 Bit FM Tuner Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: 40dB Frequency response: 30Hz-13kHz AM Tuner Tuning range: 530kHz-1710kHz Usable sensitivity: 22uV Frequency response: 30Hz-2.2kHz Monitor Panel size: 7” (177.
Dual Electronics Corp. Toll Free: 1-866-382-5476 www.dualav.com ©2007 Dual Electronics Corp. All rights reserved. NSA0707-V1.
