XDVDN9131 INSTALLATION/OWNER’S MANUAL DVD Multimedia Receiver with GPS Navigation and 7” Touch Screen Display Safety Notes: The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.
Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
XDVDN9131 PREPARATION Table of Contents Page Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preparation/Mounting/Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote Control Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Control Locations - Monitor Closed . . . . . . .
XDVDN9131 PREPARATION WARNING Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.
XDVDN9131 OPERATION Safety Information Please read all instructions carefully before attempting to install or operate. Due to its technical nature, it is highly recommended that your DUAL XDVDN9131 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only. To prevent damage or injury: • Make sure to ground the unit securely to the vehicle chassis ground. • Do not remove the top or bottom covers of the unit.
XDVDN9131 INSTALLATION Preparation Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Remove 3 transit screws located on top of the unit. • Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve.
XDVDN9131 INSTALLATION Wiring Diagram - Inputs/Outputs Note: When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could damage the unit. The XDVDN9131 uses (2) 10 amp ATM mini style fuses. There is one fuse located on the back of the unit and one fuse located inside the in-line filter box. Wiring Notes: Subwoofer output The SUBWOOFER preamp audio output (Blue RCA) is active in all audio modes.
XDVDN9131 INSTALLATION Installation - GPS Antenna & Microphone • Determine a suitable location for mounting the GPS antenna. For optimum reception, the antenna should be mounted in the center of the vehicle roof with a minimum of 6” from any window. The antenna can also be mounted to the rear trunk lid at least 4” from the rear window. • Do not install the antenna in a location where it may obstruct the field of view to the skyline such as on the front dashboard or rear deck tray.
XDVDN9131 OPERATION IR Remote Preparation Remove battery insulation tape Notes: • Remove the battery if the remote will not be used for a month or longer • Remove and dispose of battery properly • Do not store battery with metallic objects or materials To insert or replace the battery: Remove the battery holder Remove the battery from the battery holder Install the new battery Make sure to keep the (+) side up Insert the battery holder 8
XDVDN9131 OPERATION Control Locations - Monitor Closed 1 2 3 4 5 6 7 18 8 15 16 17 14 13 12 11 10 9 1 Bluetooth Microphone 10 Talk 2 Eject 11 Band/Play/Pause 3 Display/Info 12 Channel/Chapter/Track Up/Fast Forward 4 Secondary LCD 13 Power/Volume/EQ 5 Auto Store/Preset Scan 14 Channel/Chapter/Track Down/Fast Reverse 6 Open/Close Monitor 7 Front Panel Release 15 Mode 16 End Call 8 3.
XDVDN9131 OPERATION Control Functions - Monitor Closed Bluetooth Microphone Eject Display Secondary LCD AS/PS (Auto Store/Preset Scan) Open Monitor Release Built-in microphone for Bluetooth hands-free calls. Press once to eject disc. When the monitor is closed, press DISP to toggle display between information available for the current mode such as clock, frequency, track, song or chapter information. Additional LCD for system information while monitor is closed.
XDVDN9131 OPERATION Control Functions - Monitor Closed Mode End Button Mute Infrared Sensor Caution Press MODE to select between Tuner, Disc (which includes DVD and CD playback), operation of iPod, USB, Bluetooth, SD, Auxiliary 1 and Auxiliary 2 inputs. Each time the MODE button is pressed the next mode is chosen. Modes of operation are indicated on the OSD or the secondary LCD.
XDVDN9131 OPERATION Control Locations and Functions - Monitor Open 1 2 5 4 1 Close Monitor 2 SD Card Input 3 Screen Angle Up 4 Navigation 5 Screen Angle Down 3 Close Monitor Press CLOSE to open or close the monitor. Be careful not to not touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur. SD Card Input Insert SD card to play audio files.
XDVDN9131 OPERATION Control Locations - Remote 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 34 35 36 38 39 40 33 37 1 Power 16 Key #9 31 Root 2 Navigation 17 Escape 32 Repeat 3 Open/Close 18 Search 33 Chapter/Track/Seek Tune Down 4 Mode 19 Key #0/DVD Setup 34 Chapter/Track/Seek Tune Up 5 Volume Up 20 Audio Select 35 Fast Reverse/Manual Tune Down 6 Key #1 21 Menu 36 Fast Forward/Manual Tune Up 7 Key #2
XDVDN9131 OPERATION Control Functions - Remote Power Press once to turn the unit on, press again to turn unit off. Navigation Press to select between navigation mode and current source. Open Press once to open monitor; press again to close the monitor. Mode Press once to incrementally select desired source. Volume Up Keys 0-9 Volume Down Mute Increase VOLUME. Direct access for chapter/track/preset stations 1 ~ 9; keypad entry 0 ~ 9. Decrease VOLUME.
XDVDN9131 OPERATION General Operation Power On/Off Mute Loudness Momentarily press the volume control (PWR) or any other button (except EJECT) to turn the unit on. Hold for 3 seconds to turn the unit off. Press MUTE to silence the audio; Press MUTE again to cancel. will appear in the OSD (On Screen Display). Press LOUD on the OSD to turn the Loudness on/off. Pressing and holding the MUTE button on the front panel or remote will also turn the Loudness on/off.
XDVDN9131 OPERATION General Operation Info Monitor Brightness Color Setup Press INFO momentarily to display DVD disc information. Press and hold to access brightness menu. Press and hold INFO for 3 seconds to change monitor Brightness. Turn the rotary Q or P to adjust to desired level. (0 minimum/20 maximum; 10 is default). When a video source is connected to the front or rear auxiliary inputs, press INFO for more than 2 seconds to adjust COLOR SETUP during video play.
XDVDN9131 OPERATION General Operation - Main Menu 1 2 3 4 5 6 14 7 13 8 L 12 11 Main Menu Access Button/Icon Identification 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 17 10 9 There are two methods to access the MAIN menu: • Press MENU button on the remote control. • Touch MENU or the upper left corner of the touch screen from any mode (except Navigation). Touch to access AM/FM TUNER mode. Touch to access USB mode (optional USB flash drive must be inserted).
XDVDN9131 OPERATION Main Setup - Menu L L L Main Setup Menu Page 1 • • • • Press MAIN SETUP icon to access the Main setup mode. Select desired parameter you wish to change. Page will return back to previous screen after 15 seconds of inactivity or by pressing the RETURN arrow in the top right corner. Press the PAGE DOWN icon to access Main Setup page 2.
XDVDN9131 OPERATION Main Setup - Menu L L MAIN Setup Menu matrix - page 2 Settings Camera Image Default Normal TFT Auto Open Off Anti-theft Code Anti-theft 0000 Off Options Normal Reverse On Off Manual **** On Off Reset Unit No Are you sure? Yes/No Function Normal image Mirror camera image 180 degrees TFT panel will automatically open when ACC is turned on TFT panel will not auto open when ACC is turned on TFT will only open/close when OPEN button is pressed Must enter password to turn anti-t
XDVDN9131 OPERATION Main Setup - Adjusting Radio Frequency Adjusting Radio Frequency L 1 Step 1 Touch MENU at the top left corner of screen. L 2 Step 2 Touch MAIN SETUP icon. L 3 Step 3 Touch USA. LL 5 4 Step 4 Touch the setting for your region. Step 5 Touch RETURN to exit.
XDVDN9131 OPERATION Main Setup - Adjusting the Clock 12Hr Clock Mode L 1 Step 1 Touch MENU at the top left corner of screen. L 2 Step 2 Touch MAIN SETUP icon. L 3 Step 3 3) Touch the current time in the CLOCK row. L 6 L L 4 OK 5 Steps 4-6 4) When keypad appears, enter HOURS, followed by MINUTES. 5) When finished, touch OK. 6) Touch RETURN to exit. For 24Hr format, select 24Hr from CLOCK MODE, then follow steps 1-6.
XDVDN9131 OPERATION Main Setup - Setting the Anti-theft Code The default Anti-theft password is 0000 and is turned off by default. To turn this feature on, follow the steps below. CAUTION!! This will lock your unit from operating if battery power is disconnected. L Step 1 & 2 1) Touch MENU. 1 L 2 2) Touch MAIN SETUP icon. L 4 Step 3 & 4 L 3 3) Touch down arrow icon. OK L 4) Touch ****.
XDVDN9131 OPERATION Screen Setup - Menu Screen Setup Menu L • • • • • From the main menu, press SCREEN SETUP icon to access the Screen Setup mode. Press the PAGE DOWN icon to access the Version List (pages 2 and 3). Select desired parameter you wish to change. Page will return back to previous screen after 15 seconds of inactivity or by pressing the RETURN arrow in the top right corner. Press the PAGE UP icon to access Screen Setup page 1.
XDVDN9131 OPERATION Screen Setup - Setting TFT Brightness This will set the default setting for the TFT display brightness. This can also be set by pressing the INFO button for more than 3 seconds, then turning the rotary to adjust brightness level. Step 1 L 1 1) Touch MENU at the top left corner of screen. L 2 Step 2 2) Touch SCREEN SETUP icon. L 3 Step 3 3) Touch [-] to reduce brightness. LL 5 4 Step 4 4) Touch [+] to increase brightness. Step 5 5) Touch RETURN to exit.
XDVDN9131 OPERATION Screen Setup - Setting TFT Angle Set for best viewing angle for your vehicle L 1 Step 1 1) Touch MENU at the top left corner of screen. L 2 Step 2 2) Touch SCREEN SETUP icon. L 3 Step 3 3) Touch << to decrease the screen angle. L L 5 4 Step 4 4) Touch >> to increase the screen angle. The range is 1 - 4 Default = 1 Step 5 25 5) Touch RETURN to exit.
XDVDN9131 OPERATION Screen Setup - Touch Screen Calibration Upon initial installation or occasionally, the touch screen may have to be calibrated. Follow these steps as described. Step 1 L 1 1) Touch MENU at the top left corner of screen. L 2 Step 2 2) Touch SCREEN SETUP icon. L 3 Step 3 & 4 3) Touch Calibration in TS Calibration row. L 4 Step 4 & 5 4) Touch the pointers as indicated on the screen. 5) Screen will automatically return to MAIN MENU when the calibration procedure is complete.
XDVDN9131 OPERATION AM/FM Tuner Operation - OSD Overview 1 2 3 4 5 6 7 21 20 19 18 17 16 8 15 Tuner Mode 27 14 13 12 11 10 9 From the main menu, touch TUNER icon on the screen to select AM/FM Tuner mode. 1 Current Source Indicator Displays source currently playing. 2 Main Menu 3 Stereo Indicator Shows that the frequency selected is received in stereo. 4 Information Indicator Displays status of various tuning functions including Auto Station Store, Preset Scan, Scan tuning, etc.
XDVDN9131 OPERATION AM/FM Tuner Operation - OSD Overview 9 Tune Frequency - Up Touching this icon will tune the radio to a higher frequency by one frequency step. Touch and hold for continuous tuning up. (This function can also be performed by pressing the corresponding key on the remote control.) 10 Tune Frequency - Down Touching this icon will tune the radio to a lower frequency by one frequency step. Touch and hold for continuous tuning down.
XDVDN9131 OPERATION AM/FM Tuner Operation AM/FM Tuner Mode From the main menu, touch TUNER icon to select AM/FM Tuner mode. From the remote control or the front panel: Press MODE until the current station information is displayed on the screen. Band Touch BAND on the screen repeatedly until the desired band is displayed, FM1, FM2 or AM. Press the BAND button on the front panel to switch between bands, FM1, FM2 or AM. From the remote control: Press the BAND button.
XDVDN9131 OPERATION AM/FM Tuner Operation Direct Preset Tuning To select a desired station from the preset station list, touch any of the displayed station frequencies or preset numbers from the list. Use the up and down arrows on screen to select between the preset pages, if necessary. From the remote control: Press or to scroll through the presets. When the correct preset is highlighted press OK.
XDVDN9131 OPERATION WARNING Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.
XDVDN9131 OPERATION DVD Setup - Parking Brake Initialization SAFETY WARNING CAUTION !!! IT'S UNLAWFUL TO OPERATE A VEHICLE WHILE VIDEO IS DISPLAY IN THE DRIVERS VIEWING AREA ENGAGE EMERGENCY BRAKE TO WATCH VIDEO Front Monitor Video Initialization • The video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash video functions will only operate when vehicle is in Park and the PARKING BRAKE is engaged.
XDVDN9131 OPERATION DVD Setup - Region Management DVD Region Management Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVDN9131 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. This player has been designed to play back DVD software that has been encoded for specific region areas.
XDVDN9131 OPERATION DVD Setup - Inserting a Disc Eject Button Disc Loading Slot Insert DVD with label facing upwards Inserting a Disc Press REL to fold down the front panel. With the label facing up, insert a standard size disc into the slot. Gently close the front panel, the disc will automatically begin playback. Sub-menus may have to be pressed to access the DVD movie/music content. Read the directions of your specific DVD disc for other features.
XDVDN9131 OPERATION DVD Setup - Touch Screen Controls Hidden Touch Screen areas while in DVD mode There are several hidden TOUCH SCREEN areas as outlined below: "A" area can be used in DVD, A/V 1 and A/V 2 modes to access MAIN menu.
XDVDN9131 OPERATION DVD Setup Menu - Language LANGUAGE Setup Menu Note: A DVD disc must be inserted to access these functions and features. With the unit in DVD mode, press AREA E (bottom center of screen) to display the DVD transport controls (1). Press Setup (2) or press and hold the 0 key on the remote to access the DVD setup menu. The LANGUAGE setup menu will automatically be displayed. L 2 L 1 Sub Title Press the current selection to select desired disc subtitle language.
XDVDN9131 OPERATION DVD Setup Menu - Video Settings Video Setup Menu Note: A DVD disc must be inserted to access these functions and features. With the unit in DVD mode, press AREA E (bottom center of screen) to display the DVD transport controls (1). Press Setup (2) or press and hold the 0 key on the remote to access the DVD setup menu. The LANGUAGE setup menu will automatically be displayed. Press the VIDEO icon (3) to display the VIDEO setup menu.
XDVDN9131 OPERATION DVD Setup Menu - Rating Rating Setup Menu Note: A DVD disc must be inserted to access these functions and features. With the unit in DVD mode, press AREA E (bottom center of screen) to display the DVD transport controls (1). Press Setup (2) or press and hold the 0 key on the remote to access the DVD setup menu. The LANGUAGE setup menu will automatically be displayed. Press the RATING icon (3) to display the RATING setup menu.
XDVDN9131 OPERATION DVD Operation - Touch Screen Controls 1 Using the Hidden Touch Screen Controls Touch AREA E 2 DVD Mode 39 3 4 5 6 7 8 From the main menu, touch the DISC icon on the screen to select DVD mode. 1 Setup Menu Touch to access the DVD Setup menu. 2 Stop 3 Fast Reverse Touch the icon to fast reverse at 2x speed. Each touch changes speed from 2x to 4x to 8x to 16x to 32x, then back to 1x play. 4 Fast Forward Touch the icon to fast forward at 2x speed.
XDVDN9131 OPERATION DVD Operation - Searching a DVD Searching a DVD L Searching by Time, Title or Chapter Time Search Title/Chapter Search Touch Area F to bring up the Search keypad, which allows a search for a specific time, title or chapter. The Time search window appears as the default. Press Time to toggle to the Title/Chapter search window. Once the Time search window is open, use the keyboard to enter a specific time on the disc, then touch OK.
XDVDN9131 OPERATION DVD Operation Playback Control Touch Area E to bring up the on-screen buttons. to fast forward or to fast reverse. Touch Each subsequent press of the button will change the speed from normal to 2x to 4x to 8x to 16x to 32x and back to 1x. From the front panel: to fast forward. Press and hold to fast reverse. Press and hold From the remote control: to fast forward. Press to fast reverse. Press Repeat Mode icon to repeat either a chapter or title.
XDVDN9131 OPERATION DVD Operation DVD Audio Touch AUD to change the audio stream. Each touch will cycle the audio stream. From the remote control: Press the AUDIO button to select the Audio stream. Notes: • Not all DVD's have multiple languages, therefore this function may be disabled or limited. • The Audio stream can only be changed while the DVD is playing.
XDVDN9131 OPERATION CD Operation - OSD Overview 1 2 3 4 5 6 20 19 18 17 16 15 14 13 CD Mode 43 12 11 10 9 8 7 From the main menu, touch the DISC icon on the screen to select CD mode. 1 Current Source Indicator Displays source currently playing. 2 Track Number Indicator Displays current track number and total number of tracks on the disc. 3 Track Time Indicator Shows the elapsed time of the current track.
XDVDN9131 OPERATION CD Operation - OSD Overview 8 Page Down Touch the 9 Fast Forward Touch the icon to fast forward at 2x speed. Each touch changes speed from 2x to 4x to 8x to 16x to 32x then to 1x play. 10 Fast Reverse icon to fast reverse at 2x speed. Each touch changes Touch the speed from 2x to 4x to 8x to 16x to 32x then to 1x play. 11 Track Up Touch icon to see the next 6 tracks on the disc. to skip ahead to the next track.
XDVDN9131 OPERATION CD Operation Navigating the Track Title List Track Select Navigate the track title list in one of two ways: • Using the Page Up and Page Down buttons on the screen. • Using the arrow buttons on the remote control. To select a desired track from the track title list, touch any track on the list. From the remote control: Press or to scroll through the tracks. When the correct track is highlighted press OK.
XDVDN9131 OPERATION CD Operation Repeat Mode Touch RPT to repeat a track. Rpt Trk will appear next to the MENU button while this feature is activated. Touch RPT again to exit Repeat Mode. From the remote control: to select Repeat. Press it a second time to disable Repeat. Press Note: Shuffle and Repeat modes can not be used simultaneously and engaging one mode will cancel the other mode (if active.) Play/Pause Press the button to temporarily stop or resume playback.
XDVDN9131 OPERATION MP3/WMA/JPG Operation - OSD Overview 2 1 3 4 5 6 7 8 9 26 25 24 23 22 21 20 19 18 17 MP3/WMA/JPG Mode 47 16 15 14 13 12 11 10 From the main menu, touch the DISC or USB icon on the screen. 1 Current Source Indicator Displays source currently playing. 2 File Number Indicator Displays current file number and total number of files in the current folder. 3 Elapsed Time Indicator Shows the elapsed time of the current song.
XDVDN9131 OPERATION MP3/WMA/JPG Operation - OSD Overview 11 Page Down Touch the 12 Fast Forward Touch the icon to fast forward at 2x speed. Each touch changes speed from 2x to 4x to 8x to 16x to 32x then to 1x play. 13 Fast Reverse icon to fast reverse at 2x speed. Each touch Touch the changes speed from 2x to 4x to 8x to 16x to 32x then to 1x play. 14 Information Displays available ID3 tag information for the current song.
XDVDN9131 OPERATION MP3/WMA/JPG Operation Audio to Image Indicator The Audio to Image indicator allows the selection of either audio (MP3 or WMA) or image (JPEG) files to be displayed in the Playlist. Indicates that audio files are currently displayed. Press to switch to viewing image files. Indicates that image files are currently displayed. Press to switch to viewing audio files.
XDVDN9131 OPERATION MP3/WMA/JPG Operation Intro Mode Random Mode Touch INT again to preview all tracks. Intro will appear next to the MENU button while this feature is activated. Touch INT again to exit Intro Mode. Touch RDM on the screen to shuffle all tracks in the current folder. Rdm Fol will appear next to the MENU button while this feature is activated. Touch RDM again to shuffle all tracks. Rdm All will appear next to the MENU button while this feature is activated.
XDVDN9131 OPERATION USB/SD Operation - OSD Overview 2 1 3 5 4 6 7 8 9 26 25 24 23 22 21 20 19 18 17 USB/SD Mode *Note: To provide the highest level of navigation performance, this model does not support JPG image file playback from SD cards. 51 16 15 14 13 12 11 10 From the main menu, touch the USB or SD icon on the screen. 1 Current Source Indicator Displays source currently playing.
XDVDN9131 OPERATION USB/SD Operation - OSD Overview 11 Page Down Touch the 12 Fast Forward Touch the icon to fast forward at 2x speed. Each touch changes speed from 2x to 4x to 8x to 16x to 32x then to 1x play. 13 Fast Reverse icon to fast reverse at 2x speed. Each touch Touch the changes speed from 2x to 4x to 8x to 16x to 32x then to 1x play. 14 Information Displays available ID3 tag information for the current song.
XDVDN9131 OPERATION USB/SD Operation USB/SD Connection Audio to Image Indicator Note Connect a USB device or insert an SD card. When inserting an SD card, the label should face away from the unit. Note: The unit will automatically switch to SD mode when an SD card is inserted. The Audio to Image indicator allows the selection of either sound (MP3 or WMA) or image (JPEG) files to be displayed in the Playlist.
XDVDN9131 OPERATION USB/SD Operation Fast Forward/Fast Reverse Use the Fast Forward or Fast Reverse on-screen buttons to speed up the playback. Each subsequent press of the button will change the speed from normal to 2x to 4x to 8x to 16x to 32x and back to 1x. Press Press to fast forward. to fast reverse. From the remote control: to fast forward. Press to fast reverse.
XDVDN9131 OPERATION Media Compatibility - Disc MEDIA CD/DVD File Type File System ISO9660 WMA MP3 Level 1, Level 2 Level 3 X X Playback Filename 32 bytes 32 bytes Playback X X Filename X X ISO9660 Extension JOLIET Other Extensions ROMEO Apple ISO File Extension X X .mp3/.MP3/.Mp3/.mP3 X .wma/.WMA X MPEG Format Sampling Frequency .rmp/.m4a X X MPEG 1 X MPEG 2 X MPEG 2.5 X X 8/11.025/12/16/22.05 24/32/44.1/48kHz MPEG 1 MPEG 2 MPEG 2.
XDVDN9131 OPERATION Media Compatibility - USB/SD MEDIA USB Flash Drive/SD Card File Type File System File Extension WMA FAT MP3 FAT 12 X X FAT 16/FAT 32 .mp3/.MP3/.Mp3/.mP3 X .wma/.WMA X MPEG Format Sampling Frequency .rmp/.m4a X X MPEG 1 X MPEG 2 X MPEG 2.5 X X 8/11.025/12/16/22.05 24/32/44.1/48kHz MPEG 1 MPEG 2 MPEG 2.5 Bitrate Other Information X 32/44.1/48kHz X 8/11.025/12/16/22.05 24/32/44.1/48kHz WMA 22.05/32/44.
XDVDN9131 OPERATION Media Compatibility - Notes Media Compatibility The following types of discs are compatible: • CD-DA, CD-ROM (ISO), CD-R, CD-RW • DVD Video, DVD+R/RW, DVD-R/RW The following types of discs/files are not compatible: • WMA files that are protected by DRM (Digital Rights Management) • WMA lossless format • Discs recorded with Track At Once or packet writing • MP3 PRO format, MP3 playlists • RMP format • WAV format • WMV format • DivX, Xvid format • AVI format • MPG, MPEG-4 format • AAC, p
XDVDN9131 OPERATION Operation of iPod - OSD Overview 2 1 3 4 13 12 5 6 7 23 22 21 20 19 18 17 16 15 Operation of iPod 14 11 10 9 8 Connect an iPod device using the included cable. From the main menu, touch the icon of the iPod device on the screen. 1 Current Source Indicator Displays source currently playing. 2 Song Number Indicator Displays current song number and total number of songs. 3 Elapsed Time Indicator Shows the elapsed time of the current song.
XDVDN9131 OPERATION Operation of iPod - OSD Overview 59 10 Fast Forward Touch the cancel. icon to fast forward at 2x speed. Touch again to 11 Fast Reverse Touch the cancel. icon to fast reverse at 2x speed. Touch again to 12 Album Information Displays available album information for the current song. 13 Track Up 14 Track Down once to return to the beginning of the current song. Touch Press again to return to the previous song.
XDVDN9131 OPERATION Operation of iPod Search Menu The content is organized by groups. Touch the on the screen to access the search menu. Once in search menu, select one of the group types from the menu, then select an item in that group. For example: • Select the Artist group and the display will change to a list of available artists. Then select an artist from this list to hear some or all songs from that artist. • Select the Song group to hear all songs.
XDVDN9131 OPERATION Operation of iPod Repeat Mode Touch RPT to repeat a song. Repeat will appear next to the MENU button while this feature is activated. Touch RPT again to exit Repeat Mode. From the remote control: to select Repeat. Press it a second time to disable Repeat. Press Note: Shuffle and Repeat modes can not be used simultaneously and engaging one mode will cancel the other mode (if active.) Play/Pause Press PLAY/PAUSE to temporarily stop playback of the current song.
XDVDN9131 OPERATION Operation of iPod Playing Video Files L 1. Touch icon to access the search menu. 2. Touch Video, then select desired video. Video Controls Touch Area C to select the previous chapter and Area D to select the next chapter. Note: Not all movies support this feature. L Touch Area A to return to the search menu. From the front panel: to skip to the next chapter. Press to skip to the previous chapter. Press From the remote control: to skip to the next chapter.
XDVDN9131 OPERATION Operation of iPod Viewing Photos L icon to access the search menu. 1. Touch 2. Touch Photo, then begin slideshow from your iPod device. Photo Controls Notes Touch Area A to return to the search menu. Character support - only alphanumeric characters can be displayed on the secondary LCD (ASCII type). The Video and Photo modes are not supported when using the 1st and 2nd generation iPod Nano.
XDVDN9131 OPERATION Auxiliary Inputs - A/V 1 & A/V 2 Using A/V1 Input Connect an optional audio/video source into the 3.5mm (front panel) input. Select AV/1 from the Main Menu to listen to audio. Engage parking brake as described on page 32 to watch video. Adjust volume on the external audio source as needed (if connected to the headphone output). Using A/V2 Input Connect an optional audio/video source to the Auxiliary Input 2 (Red/White/Yellow RCA connectors). Refer to page 6 for details.
XDVDN9131 OPERATION Bluetooth® - OSD Overview (Optional) 1 2 3 4 5 10 6 9 8 7 Before using Bluetooth Bluetooth Mode 65 Make sure the Bluetooth option is set to On in the Bluetooth Setup menu. From the main menu, touch the Bluetooth icon on the screen. A Bluetooth icon will appear anytime a Bluetooth device is connected. 1 Audio Transfer Button Press to transfer audio between the head unit and mobile phone. 2 Talk button Press to answer an incoming call or to place an outgoing call.
XDVDN9131 OPERATION Bluetooth® - OSD Overview (Optional) 9 Phone book Icon Press to access the phone book menu. 10 Keypad Interface Icon Press to display the keypad interface.
XDVDN9131 OPERATION Bluetooth® - Setup Menu (Optional) Pairing Before you can use a Bluetooth device to make hands-free calls or stream audio, it must be authenticated. This is also referred to as "pairing" a device. Note: Please make sure that Bluetooth is activated on your mobile device before you begin the pairing process. Refer to the owner's manual of your mobile device for more details.
XDVDN9131 OPERATION Bluetooth® - Operation (Optional) Phone Book Menu Dialed Calls Received Calls Missed Calls Making a Phone Call Incoming Call Screen Press Dialed Calls to retrieve the list of dialed calls from the mobile device. Touch the desired number to call. Press the page up/down buttons to navigate through the pages. Press Received Calls to retrieve the list of received calls from the mobile device. Touch the desired number to call.
XDVDN9131 OPERATION Bluetooth® - Streaming Audio (Optional) 1 Bluetooth Audio Mode Before Using Streaming Audio 2 3 The XDVDN9131 supports A2DP wireless streaming audio from your Bluetooth mobile device directly to your head unit. You can also control your music from the front panel of the head unit using AVRCP. Make sure the Bluetooth option is set to On in the Bluetooth Setup menu and your device is paired and connected as described on page 67.
XDVDN9131 OPERATION Navigation 1 2 3 4 15 5 14 6 13 Navigation Mode 12 11 10 9 8 7 From the main menu, touch the NAVI icon on the screen or press the NAVI button on the front panel. The image above shows the map screen features when in guidance mode. Descriptions of each item are as follows: 1) Zoom out: Zooming out from level 1 to level 21 2) Compass: By tapping this icon, you can change the map display mode to Track up, North up, or 3D View.
XDVDN9131 OPERATION Navigation Turn-by-Turn Screen Route Summary Screen Navigation Main Menu Where to? My Route Clear route Settings 71 The main menu can be accessed by pressing the MENU button on the map screen. Descriptions of each button are as follows: Allows you to search for a location in various ways. Provides editing of the current route or retrieving the current route information. Stops route guidance and removes all existing locations from route.
XDVDN9131 OPERATION Navigation Where to? Page 1 of 2 Press Where To? to easily search for a location in various ways according to your purpose or preference. Go Home Favorites Emergency Hotkey for route guidance to your home location (saved in your Favorites list). Search for locations saved to your Favorites list. Hotkey for quickly searching the nearest emergency points of interest from your current position without entering any additional information. Recalls a list of recently traveled destinations.
XDVDN9131 OPERATION Navigation How to plan your first route Your current position (and direction) is indicated on the map by the red arrow . 1. Press Menu, Where To?, then Address L L L L For your convenience, previously searched state/province name and city name are initially selected on the first stage of address search. If you want to change state/province, tap Change. For State/Province search, you can search by either the full name (e.g. New York), or abbreviation (e.g. NY). 2.
XDVDN9131 OPERATION Navigation My Route Create Route Edit Route Detour Simulation Mode Route Summary Map Mode Turn-by-Turn My Route allows you to create a new route or to edit an existing route. Create Route / Edit Route buttons will change depending on situation. Available if a route has not been set. Available if a route has already been set. Use this option to edit your existing route. Allows you to avoid part of the route, a roadblock, or to set a travel via point.
XDVDN9131 OPERATION Navigation Settings Page 2 of 3 Voice/Text Language Routing Options Units Set Clock Time Zone Speed Limit Fuel Cost Settings allows you to customize the settings of the Navigation system. Change voice/text language of navigation. Change routing options. Change distance units (Miles or Kilometers). Set time and apply options such as Daylight Saving and Sync. with GPS time. Select time zone. Turn on/off the speed warning and set a tolerance level for receiving a warning alert.
XDVDN9131 OPERATION Limited One Year Warranty This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase. Dual Electronics Corp.
XDVDN9131 OPERATION End-User License Agreement (EULA) IMPORTANT – READ THESE TERMS AND CONDITIONS OF THIS END USER LICENSE AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE. This End-User License Agreement (“EULA”) is a legal agreement between you and EnGIS Technologies, Inc. (EnGIS). This EULA applies to (the use of) EnGIS software, including Internet-based services, and all contents and contents programs offered by EnGIS (“Software”). It applies to the software that accompanies these license terms.
XDVDN9131 OPERATION End-User License Agreement (EULA) 6) LIMITED WARRANTY: a) The Software is intended to be used only as a travel aid and must not be used for any purpose requiring precise measurement of direction, distance, location or topography. EnGIS makes no warranty as to the accuracy or completeness of map data or other third-party content in the application. EnGIS does not and cannot warrant that the Software operate error-free.
XDVDN9131 OPERATION Specifications Disc Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 24 Bit FM Tuner Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 15dBf Stereo separation @ 1kHz: 35dB Frequency response: 30Hz-11kHz AM Tuner Tuning range: 530kHz-1710kHz Usable sensitivity: 26uV Frequency response: 30Hz-2.2kHz USB Bluetooth Compatibility: Full Speed USB 1.1 Output: 5VDC, 500mA Compatibility: Version 2.
XDVDN9131 OPERATION Troubleshooting General Problem Unit will not turn on (no power) Unit has power (but no sound) Cause Action Yellow wire not connected or incorrect voltage Check connections for proper voltage (11~16VDC) Red wire not connected or incorrect voltage Black wire not connected Check connection to ground Fuse blown Replace fuse(s) Speaker wires not connected Check connections at speakers One or more speaker wires touching each other or touching chassis ground Insulate all bare speak
XDVDN9131 OPERATION Troubleshooting Bluetooth Problem Cause Action "Please connect first" There is no mobile device connected to the head unit Pair and or connect a mobile device to the head unit as is displayed when the described on page 67 Talk button is pressed Mobile device will not connect to the head unit Bluetooth function is not active on the head unit Activate Bluetooth function as described on page 66 Bluetooth function is not active on the mobile device Refer to the owner's manual of your
XDVDN9131 OPERATION Troubleshooting Navigation Problem No voice guidance "Acquiring GPS satellites. Please wait a moment." appears on display.
Dual Electronics Corp. Toll Free: 1-866-382-5476 www.dualav.com ©2009 Dual Electronics Corp. All rights reserved. NSA1209-V01.
