USER'S MANUAL HDVR 6000 HDD VIDEO RECORDER
I. SAFETY INSTRUCTIONS Read all the safety instructions before first use of your HDD video recorder. POWER SOURCE You should only plug the appliance into a 100V to 240VAC, 50Hz supply. Safety considerations Position the power supply lead and other leads so that they are not likely to be walked on or pinched by things placed on or against them. Do not use the appliance in humid or damp conditions. Do not allow the appliance to get wet, i.e. dripping or splashing, as this may be dangerous.
II. GETTING STARTED CHECK ACCESSORIES Remove your HDD video recorder carefully from the box, You may wish to store the packaging for future use. In the box Included in this package should be: Table 1 HDD video recorder Remote controller AAA batteries User’s manual 1 1 2 1 Read these instructions before use. Switching on Connect the 2-pin main plug into the main socket and switch on. Press the power button on the front of the unit to turn the HDD video recorder on or off.
TABLE OF CONTENTS I. SAFETY INSTRUCTIONS ............................................................................................................................................1 II. GETTING STARTED ...................................................................................................................................................2 CHECK ACCESSORIES...............................................................................................................................................
III. FEATURES 1. MULTIPLE FUNCTIONS Combines the functionalities of DVD player and HDD Recorder. 2. HDD RECORDER a. TIME-SHIFTING Time-shifting recording using the HDD (Play and record at the same time); b. PLAY/RECORD AT SAME TIME Play external DVD and record on the HDD at the same time; c. RECORD TV PROGRAM Programming to record TV input at given time and date; d.
IV.
V. BEFORE OPERATION SECURITY Before operation, check if the voltage of the unit is in line with the local voltage. Hold the plug to disconnect it from the mains outlet. Do not pull the power cord. When the plug of the unit is connected to the mains outlet, the unit will be still connected to AC even of the power is turned off. Disconnect the plug as soon as liquid or objects enter the unit. The unit cannot be used until being checked by experts. Do not open the cabinet.
VII. PREPARATIONS BEFORE OPERATION REFERENCE DRAWING FOR BACK SIDE Apparatus Claims of U.S. Patent Nos. 4，631，603; 4，577，216; 4，819，098，and 4，907，093 licensed for limited viewing uses only. Figure 6 1. VIDEO OUTPUT 2. 5.1-CH SURROUND AUDIO LEFT TRACK OUTPUT JACK 3. 5.1-CH LEFT TRACK AUDIO OUTPUT JACK 4. 5.1CH SUBWOOFER AUDIO OUTPUT JACK 5. SCART OUTPUT 6. S-VIDEO OUTPUT 7. DIGITAL AUDIO OPTICAL OUTPUT 8. DIGITAL AUDIO COAXIAL OUTPUT 9. 5.1-CH SURROUND AUDIO RIGHT TRACK OUTPUT JACK 10. 5.
REFERENCE DRAWING FOR FRONT PANEL Figure 7 1. POWER BUTTON 2. EARPHONE JACK 3. VIDEO IN PUT 4. AUDIO LEFT TRACK INPUT JACK 5. AUDIO RIGHT TRACK INPUT JACK 6. DISPLAY WINDOW 7. STANDBY INDICATOR 8. OPEN/CLOSE DISC TRAY BUTTON 9. DVD/HDVR CONVERT BUTTON 10. STOP BUTTON 11. PLAY BUTTON 12. NEXT TV CHANNEL BUTTON 13. PREVIOUS TV CHANNEL BUTTON 14. RECODER BUTTON 15. TIME/SHIFT BUTTON 16. ONE CHAPTER/TRACK BACKWARD BUTTON 17. ONE CHAPTER/TRACK FORWARD BUTTON 18.
REMOTE CONTROLLER BUTTON LAYOUT 42 Figure 9 1. OPEN/CLOSE BUTTON 2. POWER BUTTON 3. REPEAT PLAYING BUTTON 4. DIGEST BUTTON 5. TITLE BUTTON 6. PROGRAM PLAYING BUTTON 7. A-B REPEAT BUTTON 8. ANGLE BUTTON 9. SUBTITLE BUTTON 10. VIDEO MODE 11. GOTO BUTTON 12. PBC BUTTON 13. DIGIT BUTTON 14. PAL/NTSC SWITCH BUTTON 15. CLEAR BUTTON 16. MUTE BUTTON 17. REGHT/LEFT SWITCH BUTTON 18. AUDIO BUTTON 19. BOOK/MARK BUTTON 20. NEXT TV CHANNEL BUTTON 21. RECORD BUTTON 22. TV / AV SWITCH BUTTON 23. TIME/SHIFT BUTTON 24.
REFERENCE DRAWING FOR CONNECTIONS Turn off all equipment before operation. The unit has many kinds of output modes like VIDEO output, S-VIDEO output and digital signal output (OPTICAL, COAXIAL) and SCART output. You may select, as you need. This platform can also be integrated into high-end TV products such as Digital TV, HDTV, Back-Panel or Plasma-TV. CONNECTING TO POWER SUPPLY Figure 10 CONNECTING TO TV SET A.
B. VIA VIDEO CABLE AND DIGITAL CABLE Figure 12 Connect CVBS or S-Video to TV set, connect Coaxial or Optical to Amplifier. C.
CONNECTING AV INPUT DEVICE A. VIA SCART CABLE Figure 14 B. VIA AV RCA CABLE (AV1) Figure 15 C.
Figure 17 CONNECTING CABLE TV Figure 18 Notes: During HDVR's shut-down, cable TV signal is by-passed to TV set via TV tuner outport.
VIII. DVD PLAYER OPERATIONS PLAY DISCS CHAPTER 1. Connect the player with TV set according the indication in Figure 11, Figure 12 or Figure 13. 2. Push POWER on the TV, switch to AV mode (TV). / Display current chapter. Use cursor to the icon, use / to move the or CHAPTER to select required chapter, press ENTER to confirm the selection. TIME / to move the Display current time. Use cursor to 00:00:00, input time by pressing digit key, press ENTER to confirm the time setting. 3.
A- B REPEAT Repeat play function. Use cursor to the icon, use / / to move the , REPEAT or ENTER to select required repeat play function. Afterwards, the unit plays from A to B always. c. Then press A-B , remove A-B repeat. a. Repeat a chapter. Push REPEAT or use / , the screen shows: Notes: Only press A-B or / to remove A-B repeat. BOOK/ MARK b. Repeat a title Push REPEAT again or use / Set a bookmark.
audio channel, press ENTER to confirm the selection. Three play modes are available: Sequential, Programmed and Random. PBC A- B b. Press A-B again, set a point B. The screen shows: When PBC is “ON”, the system will display the A- B menu of VCD, use digit key to select what you like. When PBC is “OFF”, system will be in sequential play mode. Afterwards, the unit plays from A to B. c. Then press A-B , remove A-B repeat. REPEAT / Repeat play function.
REPEAT / Repeat play function. Use cursor to the icon, use / to move the , REPEAT or ENTER to select required repeat play function, and to confirm the selection. a. Repeat a chapter. Push REPEAT or use / Notes: Only press A-B or / to remove A-B repeat. BOOK/ MARK , the screen shows: Set a bookmark. Use / to move the cursor to the icon, use digit keys to select required position, press ENTER to confirm the selection. At maximum five bookmarks (1,2,3,4,5) can be set.
1. Push to enter the next menu. 3. Push PLAY to play normally when playing fast. ROOT 12.------MENU 13.------14.------15.------- 2. Push digit buttons to select directly. 10+ + SLOW PLAY Enjoy slow motions by the following steps. WHEN PLAYING DVD Super-VCD or VCD 3 1. Push SLOW to play slowly. The screen shows orderly: Pressing 10+ one time means adding 10. If select tracks greater 19, please press 10+ twice, and then press 1 to 9 button.
of three indicator: Time, File name, Play mode indicator. 4. Press the RETURN on the remote control handset to return to top panel when the cursor locates in bottom panel. 5. Scroll up and down through files or folders using the 0:02:00 000116825.mp3 DISC Root Mp3_01 Mp3_02 1. 000116821.mp3 2. 000116822.mp3 3. 000116823.mp3 4. 000116824.mp3 5. 000116825.mp3 6. 000116826.mp3 7. 000116827.mp3 8. 000116828.mp3 9. 000116829.mp3 UP/DOWN cursors on the remote control 6.
IX. HDD RECORDER OPERATION You can record TV program and other A/V program by PVR PAGE connecting cable TV or other A/V device output to PROGRAM LIST RECORD SCHEDULE SETTING RETURN PVR HDD recorder. DVD SETTING RECORD TV PROGRAM EXIT If you want to record a chapter when you are watching Use TV. SCHEDULE”, then push ENTER to confirm. The Push RECORD to begin record. The screen show: screen show: / to move the cursor and select “RECORD RECORD 00:00:00 CH 26 SCHEDULE LIST No.
“AV INPUT 1”（ref Figure 15）. Push RECORD to Use to move the cursor and select one begin record. The screen show: program, use / / to select and push ENTER to confirm. RECORD 00:00:00 AV1 Select “PLAY” and push ENTER to for starting play. Push STOP, if you want to finish this record. Now, the Select “SEL” and push ENTER to mark this record for adding to play list. record is over. The same way to AV2 and SCART IN recording. Notes: 1.
X. FUNCTION SETTING According to the recorded information and external equipment, set the following functions for HDD video recorder to obtain the best playing status. Push SETUP to enter the main menu. SETUP RECORD SCHEDULE Use / to move the cursor and select “REDORD SCHEOULE”, then push ENTER to confirm. the screen show: SCHEDULE LIST The screen shows: No. DATE START END INPUT REC.
PVR SETTING PAGE PVR DVD SETTING EXIT DATE/TIME SETUP HDD MANAGER RECORD QUALITY TIME SHIFTING POWER ON MODE AUTO OVERLAY RETURN “POWER-ON MODE”, the screen show: PVR SETTING PAGE SYSTEM INFO SCAN DISK FO RMAT DISK PVR DVD SETTING EXIT Select “system info”, the screen show the hard disk information. Select “scan disk”, check the hard disk, and reconstruct the hard disk if there is bad sector detected.
AUDIO SETUP PAGE VIDEO SYSTEM VIDEO SETUP PAGE ANALOG OUTPUT DIGITAL OUTPUT RETURN PVR DVD PVR DVD SETTING EXIT VIDEO SYSTEM SCREEN ASPECT VIDEO OUTPUT RETURN NTSC PAL SETTING EXIT ANALOG OUTPUT AUDIO SETUP PAGE ANALOG OUTPUT DIGITAL OUTPUT RETURN PVR DVD You can select NTSC or PAL according TV system of TV set. Select “NTSC” for a NTSC TV system output. Select “PAL” for a PAL TV system output. 2 C HANNEL 5.
MAIN SETTING Select “MANUAL”: The TV start to search one channel by one channel in manual. Use Select “FINE”: The TV start to search one channel fine adjustment. / to move the cursor and select “SETTING”.
XI. TROUBLESHOOTING If you experience the following problems while using the unit, this troubleshooting guide can help you. No sound Check if the unit is connected securely. Make sure you operate the TV or amplifier correctly. Make sure you have selected HDD video recorder position on the amplifier. No image Check if the unit is connected securely. Make sure you operate the TV correctly. Make sure you set the colour system correctly. Bad sound quality Make sure the audio output mode is set correctly.
XII.
DVD PLAYER Table 4 Television system NTSC / PAL Frequency response 20Hz~ 20KHz Signal/noise ratio(Audio) ≥ 106 dB (At 1KHz,JIS A-Weighted) Distortion (Audio) ≤ -80dB (At 1KHz 0dB) Channel separation 1KHz > 85 dB (Mixed output) 10KHz > 85 dB (Mixed output) ≥ 80 dB Dynamic range Output Audio Output Video Analogue 2.0±0.2Vrms Digital 0.5±0.1Vp-p Output impedance < 1.5KΩ Composite 1.0±0.2Vp-p Load impedance: 75Ω,imbalance, negative polarity Output Impedance 75±7.5Ω S-video out Luma 1.
