Specifications

44 Dolby
®
Professional Reference Monitor Manual
Using the Professional Reference Monitor
2.5 Saving and Loading Custom Presets
YoucanusetheRemotenumericalkeystosaveandloadyourcurrentsettingsascustom
presets.Tenpresetsareprovided,oneforeachnumericalkey(0through9).Eachpreset
savesthecurrentstateofallPRM ‐4200parameters.Inaddition,whenyousaveapreset,it
storesinformationfor anactiveLUT.
1.
Tosaveapreset,pressandholdthedesiredkeyforaminimumofthreeseconds,
select
OKattheprompt(seeFigure 2‐60),thenpressENTER.Alwaysmakeanoteof
thenumberyouuseforeachpreset.
Figure2‐60 
Figure 2-60 Save Preset Screen
ThePreset Namescreenappears,whichdisplaysakeypad,asshowninFigure 2‐61.
Figure2‐61 
Figure 2-61 Preset Name Screen
2. UsetheRemotearrowkeysandENTERkeytonameyourpresetonthedisplayed
keypad,select
Done,andthenpressENTERagain.
3. Toloadapreset,pressthecorrespondingnumericalkeyontheRemoteforatleasta
halfsecond,select
OKattheprompt(seetheexampleinFigure 2‐62),thenpress
ENTER.
Figure2‐62 
Figure 2-62 Load Preset Screen
Note: Youcannotsaveorloadapresetwhileadataentryfieldisactive.