Specifications

36 Dolby
®
Professional Reference Monitor Manual
Using the Professional Reference Monitor
IP Configuration
Whenyouselectthisoption,theMonitorIP Configuration screenappears,asshownin
Figure 2‐44.Inthisscreen,youcanconfigurethePRM‐4200Ethernetport.
Figure2‐44 
Figure 2-44 System/Utilities/Monitor IP Configuration Screen
SelectAuto (DHCP),orenterafixedIPaddress,alongwiththeSubnet Mask,Gateway,and
DNS,andthenpressENTER.
About Monitor
Whenyouselectthisoption,theAboutthis PRM-4200 screenappears,asshownin
Figure 2‐45.ThisscreendisplaysthePRM‐4200serialnumberandthesystemsoftware,
whichisthesamefortheMonitorandthe Remote.
Figure2‐45 
Figure 2-45 System/Utilities/About This PRM-4200 Screen
Note: Thisnetworksetup appliesonlytothenetwork connectionforthePRM‐4200,and
notitsdedicatedEthernetconnectiontotheRemote.