Specifications

Configuring the System Parameters
Dolby
®
Professional Reference Monitor Manual 35
YoucanchangetheRemote
LED brightnessandLCD brightnesssettingsforboth
Normal SettingsandDimmed Settingsbypressingthearrowkeys,pressingENTER,
pressingthearrowkeysagaintomoveeachslider,andpressing
ENTERagaintosave.
Thesystemretainsyoursettingswhenrebootingandupdatingthesoftware.
•Asingleright‐arrowkeypressincreasesthecurrentvalue,whileasingle‐left
arrowkeypressdecreasesthecurrentvalue
.
•Pressingandholdingtherightarrowscrollsupthroughtheavailablerange.
•Pressingandholdingtheleftarrowscrollsdownthroughtheavailablerange.
2. Pressthe
DIMbuttonontheRemotefrontpanel(nexttotheESCkey)topreviewyour
settings.
2.4.13 Configuring the System Utilities
Toconfiguretheseparameters,presstheSYSTEMkeytoactivatethetabmenu,thenusethe
arrowkeys(orthe
SYSTEM key)tomovetotheUtilities tab.
The
Utilities screenappears,asshowninFigure 2‐43.Youcanselectautilityoptionby
pressingthearrowkeys,andthenpressingthe
ENTERkey.
Figure2‐43 
Figure 2-43 System/Utilities Screen