Specifications

Configuring the System Parameters
Dolby
®
Professional Reference Monitor Manual 33
2.4.11 Configuring the Calibration Reset
Toconfiguretheseparameters:
1. Pressthe
SYSTEMkeytoactivatethetabmenu,thenusethearrowkeys(orthe
SYSTEM key)tomovetotheCalibration tab.
The
Calibration/Reset screenappears,asshowninFigure 2‐39.Youcanselecta
calibrationoptionbypressingthearrowkeys,andthenpressingthe
ENTERkey.
Figure2‐39 
Figure 2-39 System/Calibration/Reset Screen
Manual Calibration
Whenyouselectthisoption,theManual Calibrationscreenappears,asshownin
Figure 2‐40.Inthisscreen,youcanreducethered,green,andbluegainvaluesfromtheir
default(100%)settings.
Figure2‐40 
Figure 2-40 System/Calibration/Reset/Manual Calibration Screen
•UsethearrowkeystoselecttheR,G,orB slider,thenpressENTER.
•Pressandholdtherightarrowkeyoncetoincreasethecurrentvalueby0.1%.
•Pressandholdtheleftarrowkeyoncetodecreasethecurrentvalueby0.1%.
•Pressandholdtherightarrowformorethan1.5secondstoincreasevalues
continuouslyby0.1%.
•Pressandholdtheleftarrowformoretha
n1.5secondstodecreasevalues
continuouslyby0.1%.
•Press
ENTER againtosave.