Specifications

30 Dolby
®
Professional Reference Monitor Manual
Using the Professional Reference Monitor
2.4.8 Configuring the Frame Rate Conversion
Toconfiguretheseparameters,presstheSYSTEMkeytoactivatethetabmenu,thenusethe
arrowkeys(orthe
SYSTEM key)tomovetotheFrame Rate Conversion tab.
The
Frame Rate Conversion screenappears,asshowninFigure 2‐36 .Inthisscreen,youcan
configure
Deinterlacingand3:2 Pull-down.
Figure2‐36 
Figure 2-36 System/Frame Rate Conversion Screen
Youcanchangethecurrentsettingsbypressingthearrowkeys,andthenpressingthe
ENTERkey.
Deinterlacing specifieshowthesystemconvertsinterlacedformatstoprogressive
presentations.(Thesystempassesprogressiveinputsstraightthrough,sotheoutputis
alwaysprogressive.)
•
Deinterlace convertsinterlacedvideotoprogressiveoutputusingamotionadaptive
deinterlacer.Theoutputframeratematchestheinterlacedsourcefieldrate
.
• Direct Deinterlace convertsinterlacedvideotoprogressiveoutputusingblackline
insertion.Thesystemconvertseachsourcefieldtoaframe,thenfillstheundefined 
lineswithblackdata.Theoutputframeratematchestheinterlacedsourcefieldrate.
3:2 Pull-downconverts59.94iand60iinputformatsto23.98pand24p,respectively.The
systemcreateseachprogressiveoutputframeusingtheoddand evenfieldsfromtheinpu t
source.